??? Blown bravo one drive
#1
Registered
Thread Starter
Join Date: Aug 2009
Location: White Hall, IL
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
??? Blown bravo one drive
I was cruising along 3/4 throttle when my outdrive started rattaling, and the rpms reved up. Then was unable to put it into forward or reverse? what do you think happened?
#2
Registered
Join Date: Jan 2007
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to hear. I have a nice used drive if you wind up needing one (hopefully not).
#4
Registered
Thread Starter
Join Date: Aug 2009
Location: White Hall, IL
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Im heading out to the shop now to pull of the drive. If the upper gears are crashed where is the best place to get a repacement. I want to plan on my future 600hp and external steering.
Last edited by B_Schutz; 05-24-2010 at 06:10 AM.
#7
Registered
Thing is the victory is a really heavy 27 ft boat, one of the biggest 27's out there (the best 27 weekender I have ever been in) and its really hard drives.
You can get a few better parts form teague or imco and have Gadgets put them in for you. Youll need someone to tell you if your cases are any good or not- this last shot may have wiped them out.
Did you have any shavings on the last oil change?
Uncle Dave
#9
Registered
Depends on if the lower needs one as well.
For an upper and lower rebuild with ALL new parts and a thorough cleaning I think you are looking at around 5K for both.
what did the lower magnets look like?
How many hours on your rig?
Uncle Dave