280 k-planes on a 24 outlaw
 

anyone ever installed them. want to see some pics. will be a good winter project.

I have 280s on my 27 Formula and I would say they are a little large. You breath on the tab switch and can just about roll the boat on its side. I would probably go with 150s if I were to do it again. Jeff Wurl

well, i got a good deal on them and i dont even have tabs at all. sooo i was wondering if anyone has installed them on a 24 outlaw and where they had them placed. i am running in the low 70s and on smooth watere she can chine hard. also planing can be a little tough sometimes. i will be taking the project on this winter. alsi i will be putting on external steering.

may be different boat and dana tabs but you can look mine over anytime.

BTW you going down to pool 26 Sept 11, for the races?

If your battery platforms go all the way to the transom, it will make it more of a challenge.

naah prob gonna stay put. and i will look yours over.. you gonna be out for labor day?

i have about 8 to 10 inches between the transom and those boxes. think ill be ok? and where can i get lines? and i have one extra trim pump and valve body. if i just get another can i use mercruiser trim pumps fopr k planes?

Iput them on my 24 back in 91 keep ripping off the bennett ones:party-smiley-004: and put 380s on with the shortie liked them the best:coolcowboy:, but took them off for the saber28 cause it has a box and konrad,

Will be work'n entire labor day weekend.
Currently boat is in shop and appearently they are unsure what is wrong with it and having Merc go over the scan.
I keep it in the valley so when I get it back we can meet up and you check them out.

This is my old boat. 95 24 outlaw with 454 mag at 485 hp. The boat did 70 on gps. I loved the kplanes and external steering. The kplanes were easy to install. I mounted the pumps on the transom.