Offshoreonly.com
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Motor Squeal (https://www.offshoreonly.com/forums/general-q/238586-motor-squeal.html)

1MOSES1 09-12-2010 06:57 PM
That's where my squeal is coming from. Not sure if I can just change out the bearings or if the entire pulley has to be replace. Guess I'll find out when I tear into it.
I just checked and the tensioner pulley has a bearing not a bushing...If you have the same motor as me (6.2L) the pully is $24 with bearing. Almost not worth monkeying around with. Just replace the whole thing.

I have another question: is the tensioner pulley the same on a 350 as it is on a 6.2L? My dad ordered an extra one for his 350. I ll just use his if its the same.

capt2130 09-12-2010 07:33 PM
Originally Posted by moses0324 (Post 3205934)
I just checked and the tensioner pulley has a bearing not a bushing...If you have the same motor as me (6.2L) the pully is $24 with bearing. Almost not worth monkeying around with. Just replace the whole thing.

I have another question: is the tensioner pulley the same on a 350 as it is on a 6.2L? My dad ordered an extra one for his 350. I ll just use his if its the same.
I have 496ho`s. Ya I kind of figured it wouldnt be worth the aggrevation of just replacing the bearing? It'll be a winter project anyways.


All times are GMT -5. The time now is 02:32 AM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.