Can someone ID this hose?
09-22-2010 | 08:53 PM
#1
Thread Starter
Registered
Joined: Dec 2006
Posts: 498
Likes: 0
From: Merritt Island, FL
Can someone ID this hose?
Anybody know what the part number/ application this hose would be? It's basically two 90-degree bends, clocked 90 degrees away from eachother. There is about 13" between the hose ends linearly.
They came on my Gen 4 454's with crossovers. It's a perfect fit to go from the crossover down between the alternator and the block, and into the oil cooler.
Thanks! Randy
They came on my Gen 4 454's with crossovers. It's a perfect fit to go from the crossover down between the alternator and the block, and into the oil cooler.
Thanks! Randy
Last edited by bustedbrick; 09-13-2011 at 09:22 PM.
09-23-2010 | 05:18 PM
#5
Registered
Joined: Aug 2005
Posts: 8,779
Likes: 1
From: HOUSTON ,TX
