camshaft id
03-27-2011 | 05:39 PM
#1
Thread Starter
Registered
Joined: Jan 2006
Posts: 179
Likes: 2
From: brick nj
camshaft id
How about this one ? The only number on the camshaft is one on the backside. It is 01 96 0196 i think it is a mercuiser one but how about the specs? it is out of a 600sc Who knows ? Thx Greg
03-27-2011 | 07:40 PM
#2
Registered
Joined: Aug 2005
Posts: 6,306
Likes: 1
From: Between A Womans Leggs in IL
03-28-2011 | 10:05 AM
#5
MarineKinetics
Joined: Oct 2002
Posts: 942
Likes: 5
From: Rochester, NY
Greg,
Providing you can verify the lobe lift it is relatively easy to identify the camshaft. If the cam is still in the engine use a lifter and dial indicator. If out of the engine, use V blocks. The lift, on both intake and exhaust should be .329”, at the lobe. If this is correct, sent over an email and I will provide you with the cam card. To avoid any potential confusion, this is the flat tappet core, not the roller core from the 600 SCI, correct?
Bob
Providing you can verify the lobe lift it is relatively easy to identify the camshaft. If the cam is still in the engine use a lifter and dial indicator. If out of the engine, use V blocks. The lift, on both intake and exhaust should be .329”, at the lobe. If this is correct, sent over an email and I will provide you with the cam card. To avoid any potential confusion, this is the flat tappet core, not the roller core from the 600 SCI, correct?
Bob
