Dose anyone have the specs for a 741 cam.

Part Number: 168741 Grind Number: HR-236/359-2S-12 IG
Engine Identification:
Start Yr. End Yr. Make Cyl Description
1996 Up CHEVROLET 8 HR-236/359-2S-12 IG camshaft - Ch. 454-502 V8 96-00
Engine Size Configuration
454-502 C.I. V
Valve Setting: Intake - .000 Exhaust - .000 Hot/Cold - HOT
Lift: Intake @Cam 359 @Valve 610 All Lifts are based
on zero lash and theoretical rocker arm ratios.
Exhaust @ Cam 372 @Valve 632
Rocker Arm Ratio 1.70
Cam Timing: TAPPET @ .004
Lift: Opens Closes ADV Duration
Intake 38.0 BTDC 80.0 ABDC 298.0 °
Exhaust 86.0 BBDC 40.0 ATDC 306.0 °
Spring Requirements:
Part Number 99896
Loads Closed 150 LBS @ 1.900 or 1 29/32
Open 466 LBS @ 1.290

Recommended RPM range with matching components
Minimum RPM 2200
Maximum RPM 6000
Valve Float 6600
Cam Timing: TAPPET @.050
Lift: Opens Closes Max Lift Duration
Intake 11.0 BTDC 45.0 ABDC 107 236.0
Exhaust 59.0 BBDC 5.0 ATDC 117 244.0

Not trying to hijack, but does anyone have the same specs for the 731 cam? Specifically, the open/close events - I already know the .050 duration and lift.

Thanks!

http://www.cranecams.com/product/car...detail&p=24282

Quoting:
Not trying to hijack, but does anyone have the same specs for the 731 cam? Specifically, the open/close events - I already know the .050 duration and lift.

Thanks!