you started this so why do you think you get to pic anything

Seems you can't read the post I linked. I thought Orlando was in Florida. Guess you chickened out again, just like when you were challeneged by someone to bring your stuff to the dyno at Outerlimits, and never showed.

Thats funny coming from some pussies that turned a dyno shoot out into an edurance test.

We can hammer out the fine details but, since this is a performance boating website the only thing set in stone is WOT for at least 20mins on 89 octane, just like in a boat. If you can't do that then go ask for a shootout on an automotive foum.. Thanks, Alex THE ONLY THING SET IN STONE IS THE WOT FOR 20 MINS ON 89 OCTANE. production 454 block and heads, any thing else goes, dyno test at Mike Lewis and if his water is not sufficent then Westec. 10 grand winner takes all, money held by Mike Lewis 30 days prior to the test, HP dyno pulls first, then 20 mins @ 6500 RPM full load, water changed after each test, you go first endurance expert, thats the stipulations, you turned this into a endurance test, you cant have every thing your way. After all it is a boat forum, Lets go.......

its not how fast you go ,it how long you go fast .

You want to play on an OFFSHORE site, you play by our rules.

and BTW, a 20 minute WOT run is not an endurance run, its a normal offshore run.

Lets put the BS aside and get to sceduleing this thing, I will call Westec in the morning and run it by them.

You have nothing to say, lets just get it done.

We can hammer out the fine details but, since this is a performance boating website the only thing set in stone is WOT for at least 20mins on 89 octane, just like in a boat. If you can't do that then go ask for a shootout on an automotive foum.. Thanks, Alex THE ONLY THING SET IN STONE IS THE WOT FOR 20 MINS ON 89 OCTANE. production 454 block and heads, any thing else goes, dyno test at Mike Lewis and if his water is not sufficent then Westec. 10 grand winner takes all, money held by Mike Lewis 30 days prior to the test, HP dyno pulls first, then 20 mins @ 6500 RPM full load, water changed after each test, you go first endurance expert, thats the stipulations, you turned this into a endurance test, you cant have every thing your way. After all it is a boat forum, Lets go.......

what part of this post did you miss?

http://www.offshoreonly.com/forums/3509787-post72.html

All is set. It can't cost you more that a couple hundred dollars to ship your chit to florida.