Go Back  Offshoreonly.com > Technical > General Q & A
330 Hp to 400 HP >

330 Hp to 400 HP

Notices

330 Hp to 400 HP

Thread Tools
 
Old 09-22-2011 | 10:23 PM
  #121  
mikes280's Avatar
Registered
 
Joined: Feb 2001
Posts: 1,849
Likes: 1
From: charlotte nc.
Default

Bob called you out so put up or shutup
mikes280 is offline  
Reply
Old 09-22-2011 | 10:23 PM
  #122  
Registered
 
Joined: Sep 2011
Posts: 63
Likes: 0
Default

Originally Posted by Zone 5
what part of this post did you miss?

http://www.offshoreonly.com/forums/3509787-post72.html

All is set. It can't cost you more that a couple hundred dollars to ship your chit to florida.
We can hammer out the fine details but, since this is a performance boating website the only thing set in stone is WOT for at least 20mins on 89 octane, just like in a boat. If you can't do that then go ask for a shootout on an automotive foum.. Thanks, Alex THE ONLY THING SET IN STONE IS THE WOT FOR 20 MINS ON 89 OCTANE. production 454 block and heads, any thing else goes, dyno test at Mike Lewis and if his water is not sufficent then Westec. 10 grand winner takes all, money held by Mike Lewis 30 days prior to the test, HP dyno pulls first, then 20 mins @ 6500 RPM full load, water changed after each test, you go first endurance expert, thats the stipulations, you turned this into a endurance test, you cant have every thing your way. After all it is a boat forum, Lets go.......
Vortecpro is offline  
Reply
Old 09-22-2011 | 10:24 PM
  #123  
Registered
 
Joined: Sep 2011
Posts: 63
Likes: 0
Default

Originally Posted by mikes280
Bob called you out so put up or shutup
We can hammer out the fine details but, since this is a performance boating website the only thing set in stone is WOT for at least 20mins on 89 octane, just like in a boat. If you can't do that then go ask for a shootout on an automotive foum.. Thanks, Alex THE ONLY THING SET IN STONE IS THE WOT FOR 20 MINS ON 89 OCTANE. production 454 block and heads, any thing else goes, dyno test at Mike Lewis and if his water is not sufficent then Westec. 10 grand winner takes all, money held by Mike Lewis 30 days prior to the test, HP dyno pulls first, then 20 mins @ 6500 RPM full load, water changed after each test, you go first endurance expert, thats the stipulations, you turned this into a endurance test, you cant have every thing your way. After all it is a boat forum, Lets go.......
Vortecpro is offline  
Reply
Old 09-22-2011 | 10:30 PM
  #124  
mikes280's Avatar
Registered
 
Joined: Feb 2001
Posts: 1,849
Likes: 1
From: charlotte nc.
Default

i am done with you , i say you are chicken and full of chit .so go ahead and repost you stuped quote again. but just remember you ask , Bob answered , the ball is in your park , its in Fl. in Dec if you are man enough to man up
mikes280 is offline  
Reply
Old 09-22-2011 | 10:36 PM
  #125  
Registered
 
Joined: Sep 2011
Posts: 63
Likes: 0
Default

Originally Posted by mikes280
i am done with you , i say you are chicken and full of chit .so go ahead and repost you stuped quote again. but just remember you ask , Bob answered , the ball is in your park , its in Fl. in Dec if you are man enough to man up
We can hammer out the fine details but, since this is a performance boating website the only thing set in stone is WOT for at least 20mins on 89 octane, just like in a boat. If you can't do that then go ask for a shootout on an automotive foum.. Thanks, Alex THE ONLY THING SET IN STONE IS THE WOT FOR 20 MINS ON 89 OCTANE. production 454 block and heads, any thing else goes, dyno test at Mike Lewis and if his water is not sufficent then Westec. 10 grand winner takes all, money held by Mike Lewis 30 days prior to the test, HP dyno pulls first, then 20 mins @ 6500 RPM full load, water changed after each test, you go first endurance expert, thats the stipulations, you turned this into a endurance test, you cant have every thing your way. After all it is a boat forum, Lets go.......
Vortecpro is offline  
Reply
Old 09-22-2011 | 10:39 PM
  #126  
Registered
 
Joined: Feb 2002
Posts: 1,296
Likes: 1
From: LaPorte IN.
Default

Originally Posted by Vortecpro
Thats funny coming from some pussies that turned a dyno shoot out into an edurance test.
Nobody said the peak HP and torque wouldn't dictate the winner. You just have to prove it can live at that level for 20 minutes at peak HP like it would be run in a boat. Are you a little concerned your iron headed mill will go into a detonation fit after about 3 mins at peak HP on 89 octane?
WETTE VETTE is offline  
Reply
Old 09-22-2011 | 10:39 PM
  #127  
Registered
15 Year Member
 
Joined: Nov 2008
Posts: 595
Likes: 31
Default

Originally Posted by mikes280
i am done with you , i say you are chicken and full of chit .so go ahead and repost you stuped quote again. but just remember you ask , Bob answered , the ball is in your park , its in Fl. in Dec if you are man enough to man up
Forget it. He got called out, and doesn't know what to do, because he knows his ebay junk won't last 5 minutes let alone 20, so as he has nothing thats worth saying, he's can just quote himself over and over. Guess he can go back to conformance where he doesn't have to back anything up with his storage building dyno
Zone 5 is offline  
Reply
Old 09-22-2011 | 10:50 PM
  #128  
Registered
 
Joined: Sep 2011
Posts: 63
Likes: 0
Default

You lose again zone5 you have no credibility.


























Last edited by Vortecpro; 09-22-2011 at 10:54 PM.
Vortecpro is offline  
Reply
Old 09-22-2011 | 10:52 PM
  #129  
Registered
15 Year Member
 
Joined: Nov 2008
Posts: 595
Likes: 31
Default

Originally Posted by Vortecpro
You lose again zone5 you have no credibility.
Google images is your friend.
Zone 5 is offline  
Reply
Old 09-22-2011 | 10:57 PM
  #130  
Registered
 
Joined: Sep 2011
Posts: 63
Likes: 0
Default

Originally Posted by Zone 5
Google images is your friend.
Again no credibility

We can hammer out the fine details but, since this is a performance boating website the only thing set in stone is WOT for at least 20mins on 89 octane, just like in a boat. If you can't do that then go ask for a shootout on an automotive foum.. Thanks, Alex THE ONLY THING SET IN STONE IS THE WOT FOR 20 MINS ON 89 OCTANE. production 454 block and heads, any thing else goes, dyno test at Mike Lewis and if his water is not sufficent then Westec. 10 grand winner takes all, money held by Mike Lewis 30 days prior to the test, HP dyno pulls first, then 20 mins @ 6500 RPM full load, water changed after each test, you go first endurance expert, thats the stipulations, you turned this into a endurance test, you cant have every thing your way. After all it is a boat forum, Lets go.......
Vortecpro is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.