Help!!!
#1
Registered
Thread Starter
Join Date: Jun 2007
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Help!!!
i have a checkmate 251 that had a omc 460 then a volvo penta 415hp 502 efi that i just had rebuilt and put back in with a holley carb and thunderbolt ignition due to the ecu killing my motor. So heres my problem the throttle cable pushes instead of pulls on my carb linkage. do i need new contols? please help I want to go boating baddly with my new engine!!!!!!!!
#2
Registered
Depending on your type of throttle, you can make the correction there. On my gaffrigs, there is a location for pushing, and one for pulling.
#3
Offshoreonly Advertiser
Offshoreonly Advertiser
If you can'd do it up at the dash on the throttle either flip your cable mount bracket at the carb around or get a different one. I have some red anodized ones if you need one.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired