Offshoreonly.com - Dyno correction factor in Colorado

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Dyno correction factor in Colorado (https://www.offshoreonly.com/forums/general-q/262868-dyno-correction-factor-colorado.html)

Quote:

Originally Posted by Zone 5 (Post 3518966)

I guess when you are spinning a bingo wheel picking cam numbers, it doesn't take too much effort on your part after all.

Hey chris, when are you going to answer the 20 or so questions in this thread? You might be able to ignore them elsewhere, but not on OSO where people know you are full of it. The only answer you gave so far is that you do NOT work for Steff. Thats 1 out of a bunch. As you are so great at time management why don't you go back through the thread and answer what you were asked.

Doug, its Stef, not Steff. Just goes to show you dont' pay attention.

Quote:

Originally Posted by cstraub (Post 3518701)

I am banned from that forum so I can not read it.

i wonder why:party-smiley-004:

Quote:

Originally Posted by cstraub (Post 3515117)

I worked for Stefs' from July of 2003 till Oct. of 2006. I was salary then. I wanted more breadth of product to sell and Joe and i came to an agreement that I would work on a commission based program and sell his product and cultivate more WD's and MWDs for him. Since then I have been a 1099.

A manufacturers Rep.
[quote]

Quote:

Originally Posted by cstraub (Post 3518973)

Doug, its Stef, not Steff. Just goes to show you dont' pay attention.

Is it Stefs or Stef.. See above dingbat.

Hmmm. Off by one letter. Typo ? Does it matter.

or should we worry more about someone who can't really remember if they work at a certain place or not.
You left in 06 but you still say 'We at Stefs'......"

Sometimes you think you work at Stef's and sometimes you admit you don't.

Quote:

04-01-2010
cstraub
At Stef's we feel we build the highest quality marine pan on the market. Companies like Sterling, Kustom Engines, Zuel, MER, Gellner, and DNE all use our stuff. The oil pan is the only non-moving part of the engine that can destroy an engine.

We, they, me , them. All the same right.

"I think I still work at Stefs or is it Stefs' or Steff ?"

:lolhit:

Quote:

Originally Posted by cstraub (Post 3518973)

its Stef, not Steff. Just goes to show you dont' pay attention.

Thats the way you answer the questions? With no answer. 1 F, 2 F's, no F. who cares. I never told anyone the wrong stuff to put in their motor like you have. So let OSO chose. which is more important, When you blow up a customers motor because you don't know what you are doing,(efi can't have cam changes without reprogram) or if I add an F to Stef?

Quote:

Originally Posted by cstraub (Post 3514989)

Sir,
I haven't slipped back nor do I pretend to be a cam guru. Your coming to your own conclusions.

Quote:

Originally Posted by cstraub (Post 3518550)

Matt,
It can't be to bad. I have 6 custom camshafts to do today.

Can't even remember what you say the other day.

Here...repeat yourself using your quotes say 10-15 times and hopefully you'll believe yourself with a truth this time:
"I am not a cam guru. I am not a cam guru. I am not a cam guru....................................."

" I don't work at Stefs. I don't work at Stefs. I don't work at Stefs......................."

We know it's hard for you to remember truths. Try hard. You can do it. Just keep repeating truths instead of the lies and you'll....bingo...remember the truths instead of the lies.

Quote:

Originally Posted by cstraub (Post 3518716)

Lies don't exist, just in ones imagination.

coming from a man that does both.

i guess this thread is dying but still another nail in straub technoligies coffin,,, so i guess chris is NOT going to reimburse all who fell victom to his cams and lifters

Quote:

Originally Posted by 47EXCALIBUR (Post 3519623)

i guess this thread is dying but still another nail in straub technoligies coffin,,, so i guess chris is NOT going to reimburse all who fell victom to his cams and lifters

Oh, didn't you read his post, he wants his previous victims, uh, I mean customers, to call him for a refund. I am sure if they wrecked alot of stuff he will cash them out, afterall, he knows alot of big names in the performance industry and I'm sure he can do a little wheeling and dealing for good deals on some parts!! Smitty

Edited: have something better I'm working on.

Quote:

Originally Posted by cstraub (Post 3514602)

I checked my suitcases and they and they are not packed.

Nice spanglish.So how about now,maybe a deep hole from whence you comith from and take your patriot parts with you.con man