any advice on repatable engine builder in Phila. area
 

my 96 HP500 carb is down and out,broke roller off of lifter,scorred cylinder,etc.
would like to get a little more out of it but keep it reliable
any advice would be welcomed

I can tell you who NOT to go to that is close by (In MY opinion) Mike Rocca aka ROCCARD engines aka mike11.

I use www.Banditperformancemarine.com and I'm VERY HAPPY with them!! They are only one hour from Philly-located in Brick NJ. 732 477-7400 ask for Drew or Danny

Bandit Or Performance Marine Sarris Racing Engines

Dreyden Performance Marine 302-367-4962


ROCK ON !!!!!!!!!!!!!!!!!!!!!!!
ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!

Rudy did great work on my 598ci N/A, I would definitely recommend him.:coolcowboy:

The legendary Bill "Grumpy" Jenkins shop is within 15 minutes of you in Malvern, PA. He was rebuilding marine engines a while back in conjunction with Barnegat Stern Drive. Can't hurt to check it out!

Tony at CMS Racing Engines in Middle River MD. Only 90 miles south of Philly.

call lorazo 2157508324 he did my 454 made it 480 hp and last me 1683hours now just made me a 540dart with 718 hp on his dyno. very happy !!! great guy came to my marina and setup my motor :drink:and my boat runs over 80mph . 5 of my boating buddys had there motors done my him and never had a problem they run great

Does anyone know anything about ***** performance in Erial, NJ?