EFI for everyone
06-04-2014 | 02:50 PM
#312
Platinum Member
Joined: Jul 2008
Posts: 931
Likes: 0
From: Little River SC
I know from talking with Madara; you used a hydraulic roller, had Tony, put his touch on porting the heads. I used a solid roller from Madara, that Bob, explained was pretty close in comparison. Bob, could explain the difference better than I.
I just received my new laptop with Windows 7, since you can't just buy one over the counter. So I have been out of action and not enough time anyways for the social forum.
06-09-2014 | 11:35 AM
#313
Registered
Joined: Oct 2010
Posts: 368
Likes: 2
From: Ottawa, ON
Any examples of a blow through system using a centrifugal supercharger. Im doing my home work on a 540 vortech supercharger project im going to build this year. My current 502 mag its starting as doesn't appear to support the air or fuel delivery needed, so I was leaning towards a blow through carb in a box for induction until I stumbled on this post.
I"ve got twin 540s with Vortech V4 Race versions running electromotive Engine control for the MPFI (Tec3). Its pretty straight forward to look at all engine parameters with their free software and update almost anything.
http://www.electromotive-inc.com/
07-16-2014 | 06:10 AM
#315
Banned
Joined: Mar 2002
Posts: 2,103
Likes: 3
From: michigan
Brian, Nice job! How hard will it be for you to sell another carburetor after using Holley's EFI?
I know from talking with Madara; you used a hydraulic roller, had Tony, put his touch on porting the heads. I used a solid roller from Madara, that Bob, explained was pretty close in comparison. Bob, could explain the difference better than I.
I just received my new laptop with Windows 7, since you can't just buy one over the counter. So I have been out of action and not enough time anyways for the social forum.
I know from talking with Madara; you used a hydraulic roller, had Tony, put his touch on porting the heads. I used a solid roller from Madara, that Bob, explained was pretty close in comparison. Bob, could explain the difference better than I.
I just received my new laptop with Windows 7, since you can't just buy one over the counter. So I have been out of action and not enough time anyways for the social forum.
Sorry I missed this post. Sell any more carbs?.....not if I can help it. I am currently specing out 2 builds that will be going from carb to EFI and a MEFI 3 Whipple project switch to Holley EFI. Am I sold...... YES!!!!
