I have 96 Bravo Drives with bravo 4 blades. I tried to get a solid hub and I was asked which length I needed. I was unaware of diffent length hubs for Bravo Drives.

Can any one shed some light on this. I need one but want to make sure I have the right info.

Thanks for any help.

Solid hub kit for Bravo I drives merc pt # 835258a2. I don't think they come in different lengths

syringa

Solid hub kit for Bravo I drives merc pt # 835258a2. I don't think they come in different lengths,but the XR drives are different than the Bravo I

syringa

They do come in two different lengths. I found this out by ordering the wrong one first. Below are part #'s

Short shank-835258A2 (now Q2)
Standard -835258A1 (now Q1)

I can't remember my prop #, but that is how you determine which one to use. It is a '98 Merc. Bravo I 24P, and I needed the short shank. If you need the standard shank, I have one that is new and unused, that I will almost give you. Let me know. [email protected].
Good Luck.

Hey guys: This is out of the Merc prop book

835258a1 solid hub kit for A55 Bravo(with Mercruiser logo)
835258a2 "" (with Mercury Marine logo)and A56 Mirage Plus

hope this helps

syringa

Thanks for the help guys. I know we have switch hubs in the past. Guess we were lucky to have the right one.

Joe let me check but I think I do need the standard one, in I will take you up on the offer.

Thanks Again, Dan