DPX Installation
#1
Registered
Gold Member
Thread Starter
Join Date: Sep 2008
Location: Guernsey, Channel Isles
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
DPX Installation
Hi all,
I believe I need to find the vertical distance from my crankshaft to the standard merc engine feet?
I'm installing my 502 to the DPX I just fitted and have found they're totally different to a bravo to align... I've got to do all the alignment before the engine goes in but need to know wher to put the engine mounts in relation to the drive (height wise at least).
I'm using the standard merc engine feet from a 502 magnum, but then making a custom brace/mount which will hard mount to the feet.
At least if I know the vertical measurement from the crank centreline to the mounting face of the feet I can work it from there...
Any other suggestions?
Cheers, James
I believe I need to find the vertical distance from my crankshaft to the standard merc engine feet?
I'm installing my 502 to the DPX I just fitted and have found they're totally different to a bravo to align... I've got to do all the alignment before the engine goes in but need to know wher to put the engine mounts in relation to the drive (height wise at least).
I'm using the standard merc engine feet from a 502 magnum, but then making a custom brace/mount which will hard mount to the feet.
At least if I know the vertical measurement from the crank centreline to the mounting face of the feet I can work it from there...
Any other suggestions?
Cheers, James