Adjusting the rev limiter???
#1
Registered
Thread Starter
Join Date: Aug 2010
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Adjusting the rev limiter???
I want to put my rev limiter a litle higher. The fire type is thunderbolt IV and is on a 525sc gen 6 engine and actualy the rev limiter is set at 5400 rpm.
Is that I need to replace the electronic module or I can reprogram and change the point of the rev limiter?
who can be reprogram this module?
Is that I need to replace the electronic module or I can reprogram and change the point of the rev limiter?
who can be reprogram this module?
#2
Charter Member # 55
Charter Member
The TB IV rev limiter is separate component and it cannot be adjusted. You will have to swith to an after market ignition box and rev limiter.
Part #41
http://www.mercruiserparts.com/Show_...CAL+COMPONENTS
Part #41
http://www.mercruiserparts.com/Show_...CAL+COMPONENTS
#3
Registered
Thread Starter
Join Date: Aug 2010
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
The TB IV rev limiter is separate component and it cannot be adjusted. You will have to swith to an after market ignition box and rev limiter.
Part #41
http://www.mercruiserparts.com/Show_...CAL+COMPONENTS
Part #41
http://www.mercruiserparts.com/Show_...CAL+COMPONENTS
If i can't reprogram the module what do you recomended for a good ignition box and rev limiter?
Mine is like that:
http://www.mercruiserparts.com/Show_...ru+0L415623%29