Profile1234

My boat is wired with a 14 pin harness, i am repowering with a 500 HP which takes the 10 pin connector. Can i simply cut the 14 pin plug off and wire the 10 pin on?? Will the colors match up or is it not that simple??

Carbon Footprint

iTrader: (4)

there are adapters out there that connect the two, look around online, I used one when I put a newer 496 mag HO in an older formula. I think I paid $ 60

motorz

Ok this is what you are going to need.
84-892444T02
-reverse adapter that allows installing an older (10 pin) engine into a newer (14 pin) boat.

motorz

If you had Smarcraft you are going to need some extra connectors (Merc standard plugs) If you have DTS ... You might need a new dash + more ..