Inter Cooler Horsepower increase
10-02-2012 | 09:35 AM
#21
Registered
Joined: Jan 2003
Posts: 6,028
Likes: 1,523
From: Grand Rapids, MI
I'm thinking I will change the pullies to the 5.4 add 110 fuel and take a test ride yet this fall. If it works i can add the coolers this winter and already know about where I will be without adding timing. Just want to run 93 all the time and go over 100 anytime but this would be a good test! Try before I buy!!!!!
10-02-2012 | 09:45 AM
#22
Registered
Joined: Jul 2004
Posts: 11,332
Likes: 73
From: chicago
The b&m intake has a plate between #4 and #6 intake runner, that would be a perfect place to mount a probe. Just drill and tap the plate and reinstall. Would be a great idea . And finally give some real numbers just to see how much heat the chiller actually removes.
10-02-2012 | 10:03 AM
#23
Registered
Joined: Jan 2003
Posts: 6,028
Likes: 1,523
From: Grand Rapids, MI
The b&m intake has a plate between #4 and #6 intake runner, that would be a perfect place to mount a probe. Just drill and tap the plate and reinstall. Would be a great idea . And finally give some real numbers just to see how much heat the chiller actually removes.
