i would like to put full hydrolic steering on my 1999 baja h2x.. any suggenstions on what manufacturer to use for the easiest install and most reliable system.. thankjs

I used imco add on kit. Very good instructions, help on the phone when ordering, and quality

No ones kit installs easier than ours. Wing plate design and all 316L construction Here's a link too installation instructions for your review http://www.hardin-marine.com/Instruc...ed_7-13-12.pdf

And no ones kits blow the hydraulic hoses like yours either.

system pressure is function of the pump.

....Hardin Marine, What kind of warranty do you guy provide with your kit??

most all of the kits sold use basiclly the same parts, same helm assy. hose that you install ends your self, no stopping right here, battled the hose issue myself, at this point hard to beat the hardin kit but I would get it without the hose and ends, measure and have them made locally with pressed on ends...and it's not just hardin that sells the hoses this way, the brackets for the drive do vary from kit to kit but all do the same thing...keep a eye on how much room you have behind the dash and room to gauges/switches...ran into issues on the 253 checkmate and going to have to change to a longer column to get fixed right...

+1, i have imco myself and Ron went waaay out of his way to help me with clearance issues, imco hands down

I called cp performance for product info and the guy on the phone was rude and unhelpful

There were three different hydraulic hose issues last season using their hoses and fittings. Me being one of them.