Go Back  Offshoreonly.com > Technical > General Q & A
Quick engine cradle clarification? >

Quick engine cradle clarification?

Like Tree0Likes

Quick engine cradle clarification?

Reply

Old 10-18-2012, 07:35 AM
  #1
Registered
Thread Starter
 
Join Date: Jul 2010
Posts: 240
Default Quick engine cradle clarification?

Do the 496's fit on the same cradle as the 502? Also, as I'm shopping, I see some say sbc/BBC and 1000 lbs...are the sb the same as the bb? Is 1000 lbs enough for a bb to just store?

I am inquiring about the cradles that are real low/close to the ground with 4 wheels...not an engine stand that is used to work on that is about 3 feet off the ground.

Thanks!
Bad-Influence is offline  
Reply With Quote
Old 10-18-2012, 07:55 AM
  #2
Platinum Member
Platinum Member
iTrader: (5)
 
F-2 Speedy's Avatar
 
Join Date: May 2012
Location: Midwest & T-Rock
Posts: 4,938
Default

the SB & BB from the rear of the block to the motor mount is the same distance, thats where these cradles mount and yes 1000lbs is ok
F-2 Speedy is online now  
Reply With Quote
Old 10-18-2012, 12:08 PM
  #3
Registered
Thread Starter
 
Join Date: Jul 2010
Posts: 240
Default

Thanks...and 496 are the same as well too?
Bad-Influence is offline  
Reply With Quote

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


OSO Sponsor
OSO Advertiser
OSO Advertiser
OSO Advertiser