IMCO drive issue
#1
Registered
Thread Starter
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes
on
0 Posts
IMCO drive issue
Well after waiting for months to get a pair of -2/SC's.
We found out almost the hard way that drive #A176 had no provision for water to pass through it and on to the gimbal.
Check your upper case to make sure its in yours...it was not in one of mine.
Other than that they are awesome looking and we expect good results with the -2 shorties.
We found out almost the hard way that drive #A176 had no provision for water to pass through it and on to the gimbal.
Check your upper case to make sure its in yours...it was not in one of mine.
Other than that they are awesome looking and we expect good results with the -2 shorties.
#5
Registered
Thread Starter
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by cobra marty
Was that because you didn't order it that way or that they FORGOT to machine it into the case?
Was that because you didn't order it that way or that they FORGOT to machine it into the case?
Why would they send me two different ones then?
I have a pic...at work now, I will post it later.
Maybe it could be ordered that way...It was never mentioned to me at the time we ordered them?!?!
In the upper gear housing is where it was missing.
Last edited by Back4More; 07-16-2002 at 08:24 PM.
#7
Registered
Join Date: Oct 2000
Location: Simpsonville, SC 29680
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
Back4More I need some help
Sorry for being so slow but I'm not understanding totally what you are saying.
Are you saying the drive did not have a passage to allow water to get to the motor or are you talking about the drive did not have a passage to get water from the lower to the upper for its internal cooling system?
I have about 17 hours logged on my SC. With no apparent problems.
683 hp on dyno @ 5684
spinning about 5300 = 663 hp
This is a guess in red - drive loss 30 hp, - car headers to CMI's 10 hp, - accesories 10 hp = puts me at about?? 610 @ the prop.
This is on my 24' cat weighing about 4800 lbs. wet. (fuel, 2 people, cooler, etc.)
Need some help: is my calulation in red close or way off?
Are you saying the drive did not have a passage to allow water to get to the motor or are you talking about the drive did not have a passage to get water from the lower to the upper for its internal cooling system?
I have about 17 hours logged on my SC. With no apparent problems.
683 hp on dyno @ 5684
spinning about 5300 = 663 hp
This is a guess in red - drive loss 30 hp, - car headers to CMI's 10 hp, - accesories 10 hp = puts me at about?? 610 @ the prop.
This is on my 24' cat weighing about 4800 lbs. wet. (fuel, 2 people, cooler, etc.)
Need some help: is my calulation in red close or way off?
#8
Charter Member
Charter Member
Join Date: Oct 2000
Location: Lake Orion, MI. USA
Posts: 1,560
Likes: 0
Received 0 Likes
on
0 Posts
Mine have been trouble free so far, about 12 hours behind whippled 502's. Just changed the fluid, no water or problems. I did have a few shavings on the magnetic plug but only a few.
__________________
Ray
Ray
#10
Registered
Join Date: Oct 2000
Location: Simpsonville, SC 29680
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
from the lower to the upper.
meaning
01. no water to cool the drive
02. no water to cool the engine
03. or both
Sorry just got to know ya know!
I take it to be #2???
01. no water to cool the drive
02. no water to cool the engine
03. or both
Sorry just got to know ya know!
I take it to be #2???
Last edited by MIKEHTMSR24; 07-17-2002 at 10:28 PM.