Composite Dist. Gear

Reply Subscribe

Thread Tools

01-02-2013, 06:29 PM

The Get Away

Registered

Thread Starter

iTrader: (1)

Join Date: Jul 2008

Posts: 344

Likes: 1

Received 1 Like on 1 Post

Composite Dist. Gear

Anyone running a composite distributor gear?

01-02-2013, 07:46 PM

smokin' gun

Registered

iTrader: (30)

Join Date: Dec 2004

Location: hampstead nh

Posts: 3,194

Likes: 0

Received 5 Likes on 5 Posts

i run them in my engines .tall decks and have had no issues they are expensive for plastic

01-02-2013, 08:09 PM

The Get Away

Registered

Thread Starter

iTrader: (1)

Join Date: Jul 2008

Posts: 344

Likes: 1

Received 1 Like on 1 Post

What style cams are you running?

01-02-2013, 08:15 PM

smokin' gun

Registered

iTrader: (30)

Join Date: Dec 2004

Location: hampstead nh

Posts: 3,194

Likes: 0

Received 5 Likes on 5 Posts

Quote:

Originally Posted by The Get Away

What style cams are you running?

comp cams camshafts ground on crane cores .dist gears are comp cams also .i changed them from the bronze to the composite

01-02-2013, 08:30 PM

The Get Away

Registered

Thread Starter

iTrader: (1)

Join Date: Jul 2008

Posts: 344

Likes: 1

Received 1 Like on 1 Post

Sorry I should have been more specific about the style gear on the cam. I am trying to figure out why I am going through bronze distributor gears about every 20-30 hours of run time. I'm 99% sure that the cams are billet, and don't have the pressed on cast gear.

Last edited by The Get Away; 01-03-2013 at 03:41 PM.