Bravo XR
#1
Thread Starter
Registered

Joined: Oct 2000
Posts: 704
Likes: 65
From: Norway
Hi!
If everything goes well we will buy a Phantom 34 Classic with twin 496HO's over Christmas. We plan to add a Pro Charger / Whipplesupercharger. Horsepower will then be approx. 600 (3 psi) per engine.
How much horsepower can a Bravo XR handle? Since speed will be in the upper 90's we presume the new Sportmaster version would be the best to by to avoid blow out.
And finally, which of the above superchargers is the best one ..?
Cheers and thanks,
Toffen & Heidi
If everything goes well we will buy a Phantom 34 Classic with twin 496HO's over Christmas. We plan to add a Pro Charger / Whipplesupercharger. Horsepower will then be approx. 600 (3 psi) per engine.
How much horsepower can a Bravo XR handle? Since speed will be in the upper 90's we presume the new Sportmaster version would be the best to by to avoid blow out.
And finally, which of the above superchargers is the best one ..?
Cheers and thanks,
Toffen & Heidi
#3
Toffen,
This link is about procharger verses Whipple. There is an issue about cast cranks being in both the 496 and the 496 HO this year. I wouldn't want to supercharge an engine with a cast crank.
http://www.offshoreonly.com/forum/sh...threadid=29631
Dan
This link is about procharger verses Whipple. There is an issue about cast cranks being in both the 496 and the 496 HO this year. I wouldn't want to supercharge an engine with a cast crank.
http://www.offshoreonly.com/forum/sh...threadid=29631
Dan
#4
Thread Starter
Registered

Joined: Oct 2000
Posts: 704
Likes: 65
From: Norway
Hi!
I will ask Widmer Racing - a national engine builder - what he thinks is best regarding the 496HO. Balance and upgrade internals vs supercharging. I know he upgraded a 502 to 550 HP by upgrading internals. Maybe this is the way to go?
I am new to inboards dealing with outboards for many years.
Cheers and thanks, Toffen G
I will ask Widmer Racing - a national engine builder - what he thinks is best regarding the 496HO. Balance and upgrade internals vs supercharging. I know he upgraded a 502 to 550 HP by upgrading internals. Maybe this is the way to go?
I am new to inboards dealing with outboards for many years.
Cheers and thanks, Toffen G
#6
Toffen,
Call Bruce Wolff's shop, he just did a internal build up on a pair of naturally aspirated 496's (cams/ported heads) for a 29' Baja Outlaw. Aftermarket cams are hard to come by for the 496 as of yet----but Wolff has some great resourses. He'd be a good guy to talk to. Shop # is: 616-422-1090 S.W. Michigan 8-5 Eastern time
Call Bruce Wolff's shop, he just did a internal build up on a pair of naturally aspirated 496's (cams/ported heads) for a 29' Baja Outlaw. Aftermarket cams are hard to come by for the 496 as of yet----but Wolff has some great resourses. He'd be a good guy to talk to. Shop # is: 616-422-1090 S.W. Michigan 8-5 Eastern time
Thread
Thread Starter
Forum
Replies
Last Post
1BIGJIM
Drives and Lower Units
3
06-10-2008 12:46 PM
rslick
General Q & A
13
06-15-2005 11:54 PM





