Inverted oil filter on 496 ho engine?

Reply Subscribe

Thread Tools

09-08-2013 | 08:23 PM

#11

BIGBREW

Registered

Joined: Nov 2011

Posts: 146

Likes: 0

From: Upstate New York

I have the 496 I have been poking a hole, but I heard of the loosen it up and it will drain also. Once I have fresh oil in the motor I pull the lanyard switch and turn the motor over a few times to get oil pushed back up then put the lanyard back on and fire it up get pressure right away.

09-09-2013 | 01:09 AM

#12

Griff

Charter Member # 55

Joined: Oct 2000

Posts: 20,241

Likes: 2,490

From: Omaha/LOTO

Quote:

Originally Posted by 26sonic

do you poke the hole before draining the oil or during ?

It doesn't really matter. I do when I start so it has a longer time to drain out.

Use filters with an anti drainback for the reasons posted by Sydwayz.

09-09-2013 | 01:18 PM

#13

US1 Fountain

Ginger or Mary Ann?

Joined: Oct 2000

Posts: 11,030

Likes: 9

From: L

Quote:

Originally Posted by BUP

Do not poke a hole in the oil filter, unsrew it a couple turns just before it leaks oil out. let it sit overnite while you drain the motor oil out the oil drain hose - next day the oil filter will be empty on its own.

Been doing it this way for years and never a drop spilled. Usually loosen it 1st thing then pump the oil out. By then the filter has already drained. wait awhile then finish pumping rest of oil out. No more tools required or modified to punch holes. What about the debris the filter caught? Have you not now made a passage way for the debris to reenter the oiling system by punching the filter?
But whichever way tickles your fancy is ok with me