stainless marine sbc maifold clearance
#1
Registered
Thread Starter
Join Date: Jan 2013
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
stainless marine sbc maifold clearance
does anyone know if sbc stainless marine manifolds will clear tall valve covers without a spacer?ordered some today and forgot to ask.the covers are gmpp cast tall covers.thx in advance.
#2
Someone might give you a straight up answer but I looked at mine and it looks like you could go maybe 3/4 to 1 inch taller than stock center bolt covers. How much taller than stock are they?
#3
Registered
Platinum Member
iTrader: (-1)
Join Date: Jun 2012
Location: Ohio
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
They will NOT clear the normal squared edge ones. I used them on a vortec stroker motor I built for my previous boat. You can also get a steel spacer for the manifolds and use tall fabricated ones that have slight angle to the edges. Spectra performance sells a decent set of fabbed vented bolt ones that I used.
#7
Registered User
Platinum Member
iTrader: (1)
Join Date: Aug 2012
Location: Charlotte Mi.
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
As said above, they will NOT fit, I tried thicker gaskets didnt work, ordered a set of 1" spacer thought that might work it only made the problem worse. FYI if you need a set of spacers I have a brand new set & two brand new sets of super nice tall square aluminum 3/8 flange valve covers haha......
#8
Registered
Join Date: Aug 2011
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
I used retro style Edelbrock finned tall cast covers. I had to heat and gently clearance the covers with a curved body dolly. They clear the risers and Comp pro-magnum rockers, and I can remove the covers without issues.