Cam shaft numbers
01-31-2014 | 08:38 AM
#201
Banned
Joined: Mar 2002
Posts: 2,103
Likes: 3
From: michigan
Bob,
The compound variable with what either of us has to deal with is what the customer does have we have advised him on what he needs to do. Just had a customer come to me with a 434CID SBC that does not run, runs slower than this 406CID. He wants a cam change. I remembered talking to him several months ago and at that point we discussed his oil pan and headers. Pan is not a rail kick out, headers are 1 5/8". I asked him if he had changed the headers and pan. He said no. I told him no cam change was going to improve the car until he got the supporting components to achomplish his goals.
If we advise the customer on what to do and he chooses not to all of it then we have NO CONTROL.
The compound variable with what either of us has to deal with is what the customer does have we have advised him on what he needs to do. Just had a customer come to me with a 434CID SBC that does not run, runs slower than this 406CID. He wants a cam change. I remembered talking to him several months ago and at that point we discussed his oil pan and headers. Pan is not a rail kick out, headers are 1 5/8". I asked him if he had changed the headers and pan. He said no. I told him no cam change was going to improve the car until he got the supporting components to achomplish his goals.
If we advise the customer on what to do and he chooses not to all of it then we have NO CONTROL.
Bob.........what you said.....thats why I call you. You do realize that you are now forever part of C-slobs name drops I can see it now " I formulated a custom cam for a 434CID SBC with some help from my new bestest buddy Bob".
01-31-2014 | 08:49 AM
#202
Registered
Joined: Jan 2006
Posts: 3,598
Likes: 1,168
From: taxachusetts
cslob,,why don't you review your cd's on airflow,you know the ones you praised in a testimonial.Then come back and try to act as an intelligent,,con man.
01-31-2014 | 09:05 AM
#203
Banned
Joined: Jan 2005
Posts: 648
Likes: 0
From: Tri-Cities, TN
"Beat Up", Name calling, the professionalism shown by some on here would make me think long and hard whether I wanted to do business with this person or not if this is how they act on the internet representing companies we either own or work for. I don't conduct my business like a college frat house, apparently some do.
01-31-2014 | 09:10 AM
#204
Banned
Joined: Jan 2005
Posts: 648
Likes: 0
From: Tri-Cities, TN
Don's webiste, Speedtalk, is a weath of knowledge. Don was kind enough to share quite a bit of of his experience with the racing public. I would recommend Don's CD's to anyone that would like to learn about performance engines. I guess I owe you an apology Bill because I like to read others experiences and don't criticize them at every turn when their ideas are not my own. Your really blessed Bill for knowing everything already.
01-31-2014 | 09:19 AM
#205
Registered
Joined: Nov 2008
Posts: 595
Likes: 31
To bad you don't hardly post there because there are people with a clue on that site. How did your "gain 50 HP with Rods" thread over there go? Oh yea, I remember, you got called the BS artist that you are and never came back to it. Just like your HP in a bottle.
01-31-2014 | 09:21 AM
#206
Registered
Joined: Nov 2008
Posts: 595
Likes: 31
I can see its going to be another long beat up on the C-slob day.
Bob.........what you said.....thats why I call you. You do realize that you are now forever part of C-slobs name drops I can see it now " I formulated a custom cam for a 434CID SBC with some help from my new bestest buddy Bob".
Bob.........what you said.....thats why I call you. You do realize that you are now forever part of C-slobs name drops I can see it now " I formulated a custom cam for a 434CID SBC with some help from my new bestest buddy Bob".
01-31-2014 | 09:26 AM
#208
Banned
Joined: Jan 2005
Posts: 648
Likes: 0
From: Tri-Cities, TN
Jager Rod will be back up and running in the Northern Shop, Jager Power Products, this summer. If you would like to try a set Doug and see for yourself you can spend your money as you see fit.
01-31-2014 | 09:28 AM
#209
Banned
Joined: Jan 2005
Posts: 648
Likes: 0
From: Tri-Cities, TN
Doug,
Calling someone by their first name here in the south is called respect. Even if you don't care for the person, we are still human, we still have families. I apologize if you don't understand this.
Calling someone by their first name here in the south is called respect. Even if you don't care for the person, we are still human, we still have families. I apologize if you don't understand this.
01-31-2014 | 09:30 AM
#210
Registered
Joined: Nov 2008
Posts: 595
Likes: 31
You are such a tool. Go back there and read the thread so YOU understand how what you posted was BS. No one on this site gives a chit what you have to say. Do you like the feel of beating your head against concrete? Go back to the 2 sites that have drunk your koolaid and everyone will be better off (except your suckers)
