intimid8

Replacing engines and found a scare connector next to the engine wiring plug. I have a hunch its for my trim. any help would be great. Attached a photo.

Thanks


[IMG][/IMG]

intimid8

bump.

mrquad1

looks like the connector for corsa exhaust,it goes to the solinoids

intimid8

It could be but I could only find the pneumatic air tubes leading up to the silent choice.. Its on both sides where the engine connector is.

Unlimited jd

iTrader: (5)

Are they mpi motors? If so that plug I believe is the one that links both engines together so they both go into limp mode together. It's usually a yellow wire goes from one engine to the other.

intimid8

Yes they are MPi. When I was tracing them back they had already been cut by the previous owner It seems. Motors are gen v's so I don't even think they had limp mode..

intimid8

Anyone have any other ideas?

intimid8

any feedback would be great

BUP

iTrader: (9)

Year model / boat and model and info about your engines plus the engine serial #'s really could help getting some feedback. Yes you have a mercruiser cannon plug but really would help if other info is known about your app maybe to possible pin point what the connector is used for...

motor

iTrader: (3)

what color wires go into connector