Just to be clear thats Borgie new wife I posted.:party-smiley-004:

That's right. I forgot u were in Kentucky. Yes they get very interesting. Especially if it has to do with oil or a camshaft.

F%&@ck got sucked into the Borgie whirpool of $hit and there goes another thread..

If you`re not Borgie and you have an opinion please realize you`re wrong, your wife is a beast, a cow is out of your league, just bury your head in the cold snow and go away, you know NOTHING!!!!

Wait a minute Borgie posted pics of his DAD as well of him plus his and his dads full name Also pics of his wife in the past as well. We are missing pics of the Borgie kids now but have more than half of the family portrait.

Wonder if his Dad was really busy at all the PTA meetings and always being called into school when Borgie was growing up & going thru school.

you know Borgie I am just messing with you but will say Borgie does not look like his Dad Leif Borgie (son)

Does that mean I need 10w40 motor oil?

borgie chastised me( recommending to a guy rebuilding his 454 mag) BC I suggested going to a set of scat or eagle h beams rather than rebuild his Chevy rods. Stating how they simply weren't needed, overkill, and I was wasting peoples money. Now a year later he's using h beam Callie's rod with L19 bolts in his 454 upgrade.

I prefer I-Beams over H-Beams.

Round two has just started. Bring it on !

:throw:

http://www.race-mart.com/assets/images/Oliver/BBC.jpg

And pandas!!!

The panda is still waiting for a public apology!!

That was crossing the line...the whole panda insult got way out of hand

Are we talking oliver I beam or GM I beam from a 75 caprice classic ? :hijack:

I have heard that the Panda eats bushes and leaves.

Compstar rods come with ARP2000's from the factory.

Do they still rebuild stock rods?

I'm speaking of engine hard parts, not some of the marine rigging components, that don't quite fit properly. I hope the grand$$$$ was between 2 rotating assemblies. If that; kind of money was spent, even with heavier pistons and .200 + wall wrist pins it's a little on the high side. I have found it's cheaper to have Callies, balance the rotating in the long run, versus, doing it myself
That being said; what was your bobweight total and which crank and stroke did you buy. Sometimes even with a 4.500 stroke crank it requires 1 piece or tungsten in each end. A 4.250 crank and a Compstar 6.385 and a piston of 600 grams requires 1 piece of tungsten in the front counterweight . Using a 1 piece rear seal crank changes amount of tungsten in the end. Some of these cranks only require drilling.

Speaking of stock rods; 7/16 rods in a 509 NA making 630 HP at 5800 rpms. These rods had new ARP bolts installed, caps cut and resized on my equipment. Rods were matched balanced and the rotating assembly balanced, the twins went into a 42' Sonic.

Man hooters waitress you have game pal.... I'
however as you look like a character from Fraggle Rock(yes I've seen your ugly face before) it comes as no surprise to me. Some girls will look past low IQ when you( ICDEDPPL) are suckin on daddy's bank account/business.... So pathetic you are.

I unlike you have built engines, done large fiberglass jobs, rigged boats... I also restore cars on the side. Yes, I do happen to work for the fire dept. My wife happens to be a Dr with a dual phd. Were you trying to insult me with the firefighter line? I can tell you people could give a s**t about some AC tech unless they are freezing or hot due to a broken unit.. Meanwhile people are bringing me cards,cookies and saying thanks(which I don't expect by the way). You aren't in my league pal, even with daddy's money.

A few pics? I'm sure.... Please post up some more. I'm at a loss at how this fits in with anything, besides another picture of young pretty girls you will never get. I noticed those avatars have vanished lately...

4.750 6.7 ultra xd rods I don't remember the bob weight. It took alot to get it right. After all the extra weight I was left wondering why they ask what Pistons and rods are going to be used. It was done on Hines balancer that gets calibrated all the time so I'm sure it's right. Nor has it shook apart unlike the boat.

Man, I wish one of my attempts at a technical learning thread could get traction like this. :cartman:

I must be doing it wrong. Lol

Borgie - I hate to say it, okay, no I don't, you cross the line when degrading someone's wife or mom.

You've bent me in wrong ways before but whatever.

Wife or Mom ?

Nope. Not cool.

I could now care less if you existed (online) .

VC, - U are not throwing enough T & A around nor making fun of peoples wives nor their looks. Try it, it will put new rubber traction into your threads

Can someone pick out the common denominator when a thread goes bad or always mis directed or a lot of name calling and disagreements ?

Sometimes you have to sit back and look, gee am I this common denominator for this everytime . Can anyone put a finger on this common denominator.

That's nice. You aren't privy to what a stalker ICDEDPPL is. Guess that will remain between us. Or maybe not as before this I had zero clue of his career field, yet he knows all about me. Creep.

I personally know icdedppls wife and she is a friend. She's a great mom, great wife , and overall great person. And I for one think she is a very attractive woman for her age, and takes great care of herself.

You should be ashamed to say how you are "unimpressed" you are with her appearance. Classy.

Maybe he should think twice before slandering friends of my wife... Pic in his post says it all.

Explain it to us so we can see all sides to this and your post.

Borgie I know you try to bring forth tips and information in a somewhat good way but a lot of times people take your post as insulting them. I just laugh because its words down on paper kind of deal. Anyways your actions can warrant people dislikes towards you. That's all i'm saying. Tone it down some. Post what has worked for you or the reasons why you trying this bolt or that piston and so on. Jeepers tell how many boats you have worked on in past and overcome mistakes rather than peoples looks.

Not only come here and dismantle a guys thread, now insulting his wife. Gotta love oso

You make valid points and are a smart fellow, however you aren't aware of the history here. I was perfectly fine with letting it cool off, however Dan wanted to make it personal. Tick for tack...

But you have lately been bringing this Stalker word up on more than one person - why do you think people are really stalking U or is it they go to your name and look if you posted a bio of yourself. If I looked at it, I am not stalking you, would just be curious who is this person and were are they coming from. I'm lost because you have brought this stalking thing up now a bit and not just on one person. Are you trying to justify your actions / posts thinking members are stalking you ?

Phew...thanks. At first you made me nervous so I just checked my profile and have had 63 visitors and 765 likes.

I freaked out with the shear # of stalkers ! That's much more than I can handle !

But, I now you see you say that's not stalking.

Phew.

LMAOF.

Marring a DR. Doesn't make you a big shot......and you have proved that it sure don't make you classy.
Can take the kid outa the trailer park but ya can't take the trailer park outa the kid.

Smh...

yeah my point is he has posted pics of him, his dad, his wife and his name and his dads name and he lived in Seattle growing up and what his dad did in the past, what he does for a living, was gone for thanksgiving and its 82 degrees in AZ and fiberglassed many of boats and bought a Mirage 232 with rotting wood in it. heck no one needs to stalk him he forgave all the info before any stalking took place. This does not make me a stalker as I just have to read your posts.

Maybe it was the panda stalking him

Okay, back to oil pumps.

I've always wondered why, with marine engine's external lines to the remote mount filters and coolers, we don't more use of an adjustable regulator. yeh, I know, used more by belt driven wet sump pumps

Peterson, Aviaid, and etc make external oil regulators - ,and Aviaid actually makes one integrated with a remote mount oil filter head.

http://aviaid.com/products/accessories.htm

http://aviaid.com/shopsite_sc/store/.../010-40111.gif

Proving once again what a toolbag he is.

https://www.youtube.com/watch?v=1YDurhx8QyA

Thanks for proving my point;) don't you have some lot lizards to tend to? I see you have facebook creeper lol

The resident truck driver/marine expert.. Now that is classy!

Thats Borgie sucking off his moms Pool boy business/account!!
Where do you find the time to pool boy between receiving cookie and cards, being an internet expert, and putting out grill fires Borgie??

Really? Big shot? I come from money not that it's any of your business.. Coming from some dumb S**T hill billy who's Fukin his sister in a panda costume, I'm really not taking any offense!

Don't get all sad because I called you out and dissed your wife. Maybe I'll go dig up some facebook pics! Oh, that's right I have better things to do with my time... So far you've posted more fake pics of two models you claimed to bang(and I'm guessing your wife didn't see that)... And you post a picture of what you think is my wife. Anyone here want to speculate how he came up with this?!!! Oh nah he's not a stalker. Adding mild thunder to the list.