Offshoreonly.com - The trouble with Blowers is:

Page 3 of 9

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - The trouble with Blowers is: (https://www.offshoreonly.com/forums/general-q/322263-trouble-blowers.html)

Drew555

01-20-2015 06:47 PM

Quote:

Originally Posted by SB (Post 4253143)

Should we really be happy if our blower is Coast Guard Approved ?

Yes. Because they really know there way around sea men....:)

Drew555

01-20-2015 06:53 PM

Quote:

Originally Posted by Biff (Post 4253139)

They worked for Bill Cosby

So I shouldnt have taken them? I'm supposed to give them.... Sh$$. What a waste of money

Ballistic Beak

01-20-2015 06:58 PM

The best part about the blower while performing it's job is the 15 minutes of silence

Ryan

the deep

01-20-2015 07:01 PM

Ice in the cheeks on this model blower makes for a fine chiller .

Drew555

01-20-2015 07:05 PM

The problem with most blower is when they are wide open sometimes they neglect the ball bearings . Never neglect the ball bearings

phragle

01-20-2015 07:08 PM

Fresh rings also immediately induce blower whine.....

Drew555

01-20-2015 07:10 PM

Quote:

Originally Posted by phragle (Post 4253165)

Fresh rings also immediately induce blower whine.....

True.... But that whine will soon quiet down until you just don't hear anything... At all!

SB	01-20-2015 07:13 PM

Why buy a Blower Dyno when you can be one ?

sea6	01-20-2015 07:51 PM

Before the ring job, I used to be able to mount my blower on top or alternate locations. Never had a complaint about the fuel injection, either.

sea6	01-20-2015 07:53 PM

Anybody have their blowers compression reduced as the hours tick upward?

All times are GMT -5. The time now is 06:58 PM.

Page 3 of 9