Offshoreonly.com

Go Back  Offshoreonly.com > Technical > General Q & A
The trouble with Blowers is: >

The trouble with Blowers is:

Register
FAQ
Calendar
Search
Today's Posts
Mark Forums Read
Vendor Directory
Notices

The trouble with Blowers is:

 
Old 01-20-2015 | 06:47 PM
  #21  
Drew555
Registered
10 Year Member
 
Joined: Sep 2014
Posts: 789
Likes: 2
From: Long Island n.y.
Default
Originally Posted by SB
Should we really be happy if our blower is Coast Guard Approved ?
Yes. Because they really know there way around sea men....
Drew555 is offline  
Reply
0
Old 01-20-2015 | 06:53 PM
  #22  
Drew555
Registered
10 Year Member
 
Joined: Sep 2014
Posts: 789
Likes: 2
From: Long Island n.y.
Default
Originally Posted by Biff
They worked for Bill Cosby
So I shouldnt have taken them? I'm supposed to give them.... Sh$$. What a waste of money
Drew555 is offline  
Reply
0
Old 01-20-2015 | 06:58 PM
  #23  
Ballistic Beak
Registered
 
Joined: Jun 2014
Posts: 267
Likes: 12
From: Buffalo, NY
Default
The best part about the blower while performing it's job is the 15 minutes of silence

Ryan
Ballistic Beak is offline  
Reply
0
Old 01-20-2015 | 07:01 PM
  #24  
the deep's Avatar
the deep
Fast Singles Club
Veteran: National Guard
10 Year Member
Gold Member
 
Joined: Oct 2011
Posts: 4,042
Likes: 490
From: Raystown Lake , Pa.
Default
Ice in the cheeks on this model blower makes for a fine chiller .
the deep is offline  
Reply
0
Old 01-20-2015 | 07:05 PM
  #25  
Drew555
Registered
10 Year Member
 
Joined: Sep 2014
Posts: 789
Likes: 2
From: Long Island n.y.
Default
The problem with most blower is when they are wide open sometimes they neglect the ball bearings . Never neglect the ball bearings
Drew555 is offline  
Reply
0
Old 01-20-2015 | 07:08 PM
  #26  
phragle
Registered
15 Year Member
 
Joined: Apr 2006
Posts: 10,042
Likes: 712
From: Toledo Oh
Default
Fresh rings also immediately induce blower whine.....
phragle is offline  
Reply
0
Old 01-20-2015 | 07:10 PM
  #27  
Drew555
Registered
10 Year Member
 
Joined: Sep 2014
Posts: 789
Likes: 2
From: Long Island n.y.
Default
Originally Posted by phragle
Fresh rings also immediately induce blower whine.....
True.... But that whine will soon quiet down until you just don't hear anything... At all!
Drew555 is offline  
Reply
0
Old 01-20-2015 | 07:13 PM
  #28  
SB
Registered
20 Year Member
 
Joined: Nov 2004
Posts: 14,094
Likes: 3,684
From: On A Dirt Floor
Default
Why buy a Blower Dyno when you can be one ?
SB is offline  
Reply
0
Old 01-20-2015 | 07:51 PM
  #29  
sea6
Registered
 
Joined: Apr 2006
Posts: 230
Likes: 0
From: RVA
Default
Before the ring job, I used to be able to mount my blower on top or alternate locations. Never had a complaint about the fuel injection, either.
sea6 is offline  
Reply
0
Old 01-20-2015 | 07:53 PM
  #30  
sea6
Registered
 
Joined: Apr 2006
Posts: 230
Likes: 0
From: RVA
Default
Anybody have their blowers compression reduced as the hours tick upward?
sea6 is offline  
Reply
0

Thread Tools

Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.