|
Dale, put blowers on yours, running out of time LOL
|
Tim, thanks buddy for letting me know, lol.
|
Was told Friday that going from standard to tall deck is 1/3" up and out at a 45 degree angle and then after market heads are another 1/3" up and out at a 45 so you guys are right need to stay with a standard deck cause the up part will not work so well for me. I am already touching hatch and rear deck above transom is already notched.
|
AFR raises the exhaust .250, others even more.
|
Originally Posted by bigboat28
(Post 4258952)
Was told Friday that going from standard to tall deck is 1/3" up and out at a 45 degree angle and then after market heads are another 1/3" up and out at a 45 so you guys are right need to stay with a standard deck cause the up part will not work so well for me. I am already touching hatch and rear deck above transom is already notched.
|
Ron sporl Performance
|
Interesting.
|
With using the same heads.. going from a 9.8 to a 10.2 block.. exhaust will be .285 higher and .285 wider with the 10.2 block
|
98 32 fever tall decks stelling dry headers no problem changing plugs custom headers help alot
|
Originally Posted by BLUEMAGIC
(Post 4261395)
98 32 fever tall decks stelling dry headers no problem changing plugs custom headers help alot
|
| All times are GMT -5. The time now is 05:27 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.