What to use to glue the cockpit sole down?
03-15-2015 | 11:07 PM
#1
Thread Starter
Registered
Joined: Jun 2012
Posts: 428
Likes: 3
What to use to glue the cockpit sole down?
What to use to glue the cockpit sole down?
Doing stringer work. Then will need to glue down the floor. Typically I see manufactures use a pink hard chalk like substance with a look of body so it can fill up to 3/4" gaps. Anyone know what to use?
Thanks
Doing stringer work. Then will need to glue down the floor. Typically I see manufactures use a pink hard chalk like substance with a look of body so it can fill up to 3/4" gaps. Anyone know what to use?
Thanks
03-17-2015 | 08:55 AM
#4
Registered
Joined: Dec 2013
Posts: 527
Likes: 52
From: Greenfield, Me.
Ayuh,.... Sure ya can,... I make putty all the time,.....
Just add alittle ground glass, maybe some glass fiber, then thicken with cab-o-sil til it's a putty,.....
The deck, should be pretty much restin' on the stringers, Before ya glue down anything,.....
Just add alittle ground glass, maybe some glass fiber, then thicken with cab-o-sil til it's a putty,.....
The deck, should be pretty much restin' on the stringers, Before ya glue down anything,.....
03-17-2015 | 01:22 PM
#7
Banned
Joined: Jul 2011
Posts: 9,594
Likes: 45
From: Ft. Worth TX
many boat builders use the link below and I know at one time and possible still one of their bonding adhesives was pink
http://www.itwplexus.com/industries/marine.cfm
http://www.itwplexus.com/industries/marine.cfm
