Flushing tubular oil cooler... yes or no??
1 Attachment(s)
I have 18"x3" oil coolers, one had crap go through it, I was gonna buy new, but then was told I can flush this style, so I did, had crap come out, seems clean, but still hesitant to run it, the oil is filtered after the cooler, but I do run the 30lb bypasses... so whats the take on these? not a cheap cooler but if it is a must I will buy them.....
[ATTACH=CONFIG]540564[/ATTACH] |
If it goes through a filter after cooler I would run it. Wash it with soap and water try to use hot water on garden hose..
|
tim,how much money&time do you have in the new engines?now how much is a new cooler?you may get by with it but i would not take the risk but i,m not a lucky gambler,are you?
|
Originally Posted by mike tkach
(Post 4298514)
tim,how much money&time do you have in the new engines?now how much is a new cooler?you may get by with it but i would not take the risk but i,m not a lucky gambler,are you?
|
if nothing else you will sleep better with a new cooler.
|
Originally Posted by mike tkach
(Post 4298517)
if nothing else you will sleep better with a new cooler.
|
Originally Posted by SB
(Post 4298521)
x2. A used cooler will get your sheets all messy.
|
Lol
|
Know any body with an ultrasonic cleaner?
Ken |
Think in just gonna buy new....
|
All times are GMT -5. The time now is 08:04 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.