525 water pressure problem
07-13-2016, 11:51 AM
#41
Registered
Thread Starter
Join Date: Apr 2011
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
sorry for the long delay busy busy busy. I drilled and pluged four inlet holes on each side of the Brovo xr drive..Some results not enough. I,m going to remove the plugs and plug 2 inlet holes on the nose cone. I,ll post the results ............ Sad I broke the plastic emblem on the side of my 29 fever Now I,m missing the lighting bolt/prop emblem. can,t seem to find one
