502 efi overheating.
07-30-2015 | 09:24 PM
#11
Banned
Joined: Jul 2011
Posts: 9,594
Likes: 46
From: Ft. Worth TX
Did you just change impeller but not the black plastic housing and wear plate along with the correct new o-ring gaskets ?
If you did change all of that - did you crack the impeller housing when cranking the bolts down ? It only requires 10 ft lbs of torque in a star pattern when installing
If you did change all of that - did you crack the impeller housing when cranking the bolts down ? It only requires 10 ft lbs of torque in a star pattern when installing
07-30-2015 | 09:47 PM
#12
Banned
Joined: Jul 2011
Posts: 9,594
Likes: 46
From: Ft. Worth TX
The SB says saltwater only but that is not true. Seen many from lake waters as well.
http://www.boatfix.com/merc/bullet/90/90_14.PDF
http://www.boatfix.com/merc/bullet/90/90_14.PDF
07-30-2015 | 09:47 PM
#13
Registered
Joined: Jun 2012
Posts: 1,455
Likes: 1
From: OK CIty, OK
Did you just change impeller but not the black plastic housing and wear plate along with the correct new o-ring gaskets ?
If you did change all of that - did you crack the impeller housing when cranking the bolts down ? It only requires 10 ft lbs of torque in a star pattern when installing
If you did change all of that - did you crack the impeller housing when cranking the bolts down ? It only requires 10 ft lbs of torque in a star pattern when installing
