Talon wouldn't fire yesterday at the ramp
#31
Charter Member
Charter Member
Thread Starter
Thanks guys for all the input I'll try some of this stuff tomorrow before the game since I'm working today once again
__________________
Everything is for sale @ a certain $$
Everything is for sale @ a certain $$
#32
Registered
we used to race with MSD componants, certain parts, magnetic pickups in pro-billet dist are from china, absolute junk, why they only cost $25, makes no sense as they fail at will. The boxes are a crap shoot as well, especially the 6 series stuff, and the bottom line is they make you car/boat/whatever go no faster unless you had a junk part before, why I am back using the old style HEI, I get the vac advance remove piece, correct connectors, and even lock the advance out on some...cheap, no issues, why DUI units so well liked..
#36
Charter Member
Charter Member
Thread Starter
Mike,
No, on Superbowl Sunday, I had to cut down 3 trees in my mother-in-law's backyard. Haven't had a day off since..... And I have cats running wild in the neighborhood!
No, on Superbowl Sunday, I had to cut down 3 trees in my mother-in-law's backyard. Haven't had a day off since..... And I have cats running wild in the neighborhood!
__________________
Everything is for sale @ a certain $$
Everything is for sale @ a certain $$
#37
Charter Member
Charter Member
Thread Starter
Wellll, re-verified that I have +12VDC at the + post of the new SS coil, and +12VDC at the RED wire going into the MSD Dist, and still spark. Pretty sure it's the module in the dist., is there any other test I can do before I have to order a new MSD Ready to Run dist....
FYI the MSD Ready run system DOESN'T use an external 6M Box either.
FYI the MSD Ready run system DOESN'T use an external 6M Box either.
__________________
Everything is for sale @ a certain $$
Everything is for sale @ a certain $$
Last edited by Dean Ferry; 02-29-2016 at 07:47 AM.
#38
Platinum Member
Platinum Member
http://www.summitracing.com/parts/msd-84661 but call msd tech line
Toll Free MSD and Mallory Ignition Tech Line: 888-673-7859
MSD and Mallory Ignition Tech Line: 915-855-7123
Call our tech line Monday through Friday, 7am to 5pm Mountain Standard Time
*(CLOSED FOR LUNCH FROM 12PM TO 1 PM MOUNTAIN STANDARD TIME)
Toll Free MSD and Mallory Ignition Tech Line: 888-673-7859
MSD and Mallory Ignition Tech Line: 915-855-7123
Call our tech line Monday through Friday, 7am to 5pm Mountain Standard Time
*(CLOSED FOR LUNCH FROM 12PM TO 1 PM MOUNTAIN STANDARD TIME)
#39
Registered
iTrader: (3)
Wellll, re-verified that I have +12VDC at the + post of the new SS coil, and +12VDC at the RED wire going into the MSD Dist, and still spark. Pretty sure it's the module in the dist., is there any other test I can do before I have to order a new MSD Ready to Run dist....
FYI the MSD Ready run system DOESN'T use an external 6M Box either.
FYI the MSD Ready run system DOESN'T use an external 6M Box either.
#40
Registered
Wellll, re-verified that I have +12VDC at the + post of the new SS coil, and +12VDC at the RED wire going into the MSD Dist, and still spark. Pretty sure it's the module in the dist., is there any other test I can do before I have to order a new MSD Ready to Run dist....
FYI the MSD Ready run system DOESN'T use an external 6M Box either.
FYI the MSD Ready run system DOESN'T use an external 6M Box either.