Offshoreonly.com

Go Back  Offshoreonly.com > Technical > General Q & A
Engine Quest Head work results >

Engine Quest Head work results

Register
FAQ
Calendar
Search
Today's Posts
Mark Forums Read
Vendor Directory
Notices

Engine Quest Head work results

 
Old 04-08-2016 | 01:25 PM
  #71  
articfriends's Avatar
articfriends
Platinum Member
20 Year Member
Platinum Member
 
Joined: Jun 2004
Posts: 7,317
Likes: 1,037
From: frankenmuth michigan
Default
Ran into same thing on my AFRs and KRE Pontiac heads, one of the 2 i had to even reduce the OD of a good snapon socket to get it in plug recess
articfriends is offline  
Reply
0
Old 04-08-2016 | 02:48 PM
  #72  
Panther's Avatar
Panther
Frank's Marine Service
20 Year Member
Gold Member
 
Joined: Sep 2002
Posts: 11,959
Likes: 142
From: Elkton, MD
Default
Originally Posted by MILD THUNDER
Strange. I just tried two different spark plug sockets, a craftsman and off brand, both fit fine.
Mine must be machined differently. Two heads the regular socket went in fine but a little tight. The other two heads were a little trying.

Originally Posted by articfriends
Ran into same thing on my AFRs and KRE Pontiac heads, one of the 2 i had to even reduce the OD of a good snapon socket to get it in plug recess
My AFR's go in ok for me.

Weird!!
Panther is offline  
Reply
0
Old 04-21-2016 | 08:29 PM
  #73  
Panther's Avatar
Panther
Frank's Marine Service
20 Year Member
Gold Member
 
Joined: Sep 2002
Posts: 11,959
Likes: 142
From: Elkton, MD
Default
The EQ's have a nice crackle...
https://youtu.be/2FlgQjgyc5Q
Panther is offline  
Reply
0
Old 04-21-2016 | 08:33 PM
  #74  
MILD THUNDER
Thread Starter
Registered
20 Year Member
 
Joined: Jul 2004
Posts: 11,332
Likes: 73
From: chicago
Default
Originally Posted by Panther
The EQ's have a nice crackle...
https://youtu.be/2FlgQjgyc5Q
Sounds good !
MILD THUNDER is offline  
Reply
0
Old 04-22-2016 | 08:23 AM
  #75  
Gimme Fuel
Registered
 
Joined: Oct 2010
Posts: 922
Likes: 128
From: Hemlock, MI
Default
Originally Posted by Panther
The EQ's have a nice crackle...
https://youtu.be/2FlgQjgyc5Q
Sounds real nice! What cam and expected HP?
Gimme Fuel is offline  
Reply
0
Old 04-22-2016 | 08:52 AM
  #76  
Panther's Avatar
Panther
Frank's Marine Service
20 Year Member
Gold Member
 
Joined: Sep 2002
Posts: 11,959
Likes: 142
From: Elkton, MD
Default
Originally Posted by Gimme Fuel
Sounds real nice! What cam and expected HP?
268741, 540/570hp.
Panther is offline  
Reply
0
Old 04-22-2016 | 08:53 AM
  #77  
MILD THUNDER
Thread Starter
Registered
20 Year Member
 
Joined: Jul 2004
Posts: 11,332
Likes: 73
From: chicago
Default
You gonna dyno it Frank?
MILD THUNDER is offline  
Reply
0
Old 04-22-2016 | 08:54 AM
  #78  
Panther's Avatar
Panther
Frank's Marine Service
20 Year Member
Gold Member
 
Joined: Sep 2002
Posts: 11,959
Likes: 142
From: Elkton, MD
Default
Originally Posted by MILD THUNDER
You gonna dyno it Frank?
Planning on it.
Panther is offline  
Reply
0
Old 04-22-2016 | 08:58 AM
  #79  
MILD THUNDER
Thread Starter
Registered
20 Year Member
 
Joined: Jul 2004
Posts: 11,332
Likes: 73
From: chicago
Default
Originally Posted by Panther
Planning on it.
Cool. Mine should be ready for the dyno pretty soon.
MILD THUNDER is offline  
Reply
0
Old 04-22-2016 | 09:41 AM
  #80  
F-2 Speedy's Avatar
F-2 Speedy
Platinum Member
Community Builder
10 Year Member
Platinum Member
 
Joined: May 2012
Posts: 11,428
Likes: 3,955
From: Midwest & T-Rock
Default
Originally Posted by articfriends
Ran into same thing on my AFRs and KRE Pontiac heads, one of the 2 i had to even reduce the OD of a good snapon socket to get it in plug recess
# 5 hole on the starboard engine is real tight, had to use a thin wall 5/8 socket to get it out ( AFR )
F-2 Speedy is offline  
Reply
0

Thread Tools

Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.