K1 tech vs molnar
04-04-2016 | 08:34 PM
#11
Thread Starter
Registered
Joined: Feb 2009
Posts: 8,356
Likes: 1,515
From: NW Michigan
I just placed an order for molnar crank and rods along with a set of autotec Pistons. I hesitated on the Pistons however thought I'd give them a try. Seems like the number of actual manufactures of rotating assembly parts are getting less and less with really just a few with a sister company here and there under another name. I've been fortunate over the years with rotating assemblies however every engine I've built gets balanced.
04-05-2016 | 01:19 AM
#13
Registered
Joined: Aug 2005
Posts: 6,306
Likes: 1
From: Between A Womans Leggs in IL
I just placed an order for molnar crank and rods along with a set of autotec Pistons. I hesitated on the Pistons however thought I'd give them a try. Seems like the number of actual manufactures of rotating assembly parts are getting less and less with really just a few with a sister company here and there under another name. I've been fortunate over the years with rotating assemblies however every engine I've built gets balanced.
04-05-2016 | 06:15 AM
#14
Registered
Joined: Nov 2004
Posts: 14,094
Likes: 3,684
From: On A Dirt Floor
Yes sir.
http://racetecpistons.com/pages/history.php
Edit in: This is interesting:
http://racetecpistons.com/pages/history.php
Edit in: This is interesting:
Bore, Ring Pack, and Compression Distance changes can be made to any shelf part at no extra charge.
If you do not see your application listed in the application guide, please contact us…we can make what you need without charging a custom price.
If you do not see your application listed in the application guide, please contact us…we can make what you need without charging a custom price.
Last edited by SB; 04-05-2016 at 06:20 AM.
