yes no water pump.

My pumps are gone also [IMG]http://i882.photobucket.com/albums/a...pspxxkzavn.jpg[/IMG]

Clean. Thanks for making me hate my boat, lol.

With the crossovers did you tap into the back with pressure valves dumping the excess overboard? I run in some 50-60* water and worry about getting too cold with the cross overs.

I'm also curious what size oil coolers you guys are running with those Vortech motors. I currently have a 2x18" cooler with 3/4" lines. I'm thinking that I may need to go bigger.

I had pressure relief valves on it before I put the crossovers on and saw no difference in the pressure on the gauges ,I still run a thermostat in the intake ,my oil coolers are 3x20 and have a thermostatic by-pass in them,

Any reason not to tap into the filter head instead of back by the pressure sensor per the generic instructions?http://i622.photobucket.com/albums/t...83450F7DD1.jpg

I don't see why you can't just make sure you are on the clean side of the filter