Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   AFR 325 flow sheets.... anyone ever flow these heads? (https://www.offshoreonly.com/forums/general-q/340844-afr-325-flow-sheets-anyone-ever-flow-these-heads.html)

sutphen 30 01-11-2017 09:56 AM


Originally Posted by Full Force (Post 4518562)
500 hp

don't over estimate your build so quick.

sutphen 30 01-11-2017 09:57 AM


Originally Posted by bck (Post 4518555)
We could add a bunch of pages if we start guessing what the new hp will be. What did these dyno at again?

winner gets to throw more bananas.

vintage chromoly 01-11-2017 10:09 AM


Originally Posted by sutphen 30 (Post 4518572)
winner gets to throw more bananas.

Corn cobs man! Corn cobs!

bck 01-11-2017 10:18 AM

It can be a two part guess or bet. How much power and who takes the blame. That should add several more pages. I have to page through and find the old power numbers cause Tim isn't sharing.
We have to guess before he picks a cam to keep it fair though.

MILD THUNDER 01-11-2017 10:45 AM

Last time he made 630hp in full dress.

Im sure this time, if we gave him a month on the dyno, a 900rpm per second sweep rate (great for data acquisition), one of those 12% at sea level correction factors, a bunch of parts two swap around, yank off all the accessories, im positive he could squeak out a 700hp number on paper

offshorexcursion 01-11-2017 11:01 AM

None of this matters if it doesn't equate to actual MPH gain while being reliable, for a fair price....this is One of the biggest issues when guided by Bob or some others.

But we definitely need to start another thread with

Max horsepower guess
Top speed
Hours before freshen
Hours before Tim gets sick of going slow and changes something or sells
Who's to blame in event of a failure
What parts to blame
Etc

Full Force 01-11-2017 11:11 AM


Originally Posted by bck (Post 4518578)
It can be a two part guess or bet. How much power and who takes the blame. That should add several more pages. I have to page through and find the old power numbers cause Tim isn't sharing.
We have to guess before he picks a cam to keep it fair though.

629 hp@5900 638tq 4400 in marine trim

I mean you can sit here and say things to me all while I boated last summer, and the one before... while you did everything in your power to PAY SOMEONE to get you barely 700 hp, and zero time in the boat, I mean if that makes me an idiot then that's fine, and I will boat again all summer again... while you decide what else to do to yours, or I mean pay the builder to do.

Full Force 01-11-2017 11:12 AM


Originally Posted by MILD THUNDER (Post 4518587)
Last time he made 630hp in full dress.

Im sure this time, if we gave him a month on the dyno, a 900rpm per second sweep rate (great for data acquisition), one of those 12% at sea level correction factors, a bunch of parts two swap around, yank off all the accessories, im positive he could squeak out a 700hp number on paper

you mean like BCK did? And paid someone to do it all?

Full Force 01-11-2017 11:13 AM


Originally Posted by offshorexcursion (Post 4518591)
None of this matters if it doesn't equate to actual MPH gain while being reliable, for a fair price....this is One of the biggest issues when guided by Bob or some others.

But we definitely need to start another thread with

Max horsepower guess
Top speed
Hours before freshen
Hours before Tim gets sick of going slow and changes something or sells
Who's to blame in event of a failure
What parts to blame
Etc

I have taken. Lame for things that were my fault, aside from that? No... and you blamed bob for everything on yours not yourself.

Interceptor 01-11-2017 11:17 AM

Sense a dick fight approaching.


All times are GMT -5. The time now is 12:47 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.