Originally Posted by MILD THUNDER (Post 4488086)

Has anyone heard from Bob? It be interesting to hear why these cams are showing lobe wear, and some being outperformed when back to back tests were completed vs another off the shelf camshaft. I've heard him critique others camshaft designs, it be interesting to hear.

Maybe its assembly error by some of the pro engine builders.

Maybe its the springs supplied by afr on his "custom" heads he gets machined especially for marine endurance applications. You know, the same ones that you can get from any afr dealer with a inconel valve upgrade.

Maybe its the builders secretly sabatoging the builds to make him look bad

Maybe its the cam companys fault

Maybe its the lifter companies fault

Maybe its the brand of oil used

Maybe its the block isnt thermally stable

Maybe its a big scam to put him out of business .

Maybe its the lifter bore clearance again.

Originally Posted by Zone 5 (Post 4488091)

I guess I must have missed where anywhere in internet land its posted that I have a MK cam or ever had. You make this BS up as you go along.

As I have said in multiple places, I and others I know have bought a ton of parts from Bob ( with ZERO issues), but that does not include cams.

I don't believe that I have ever told anyone to buy a custom cam. I very well may have told someone to call Bob if they had a question on multiple parts including cams. I also highly doubt that there is any post from me defending him, as there has never been a need to. If you think I'm getting in the middle of this thread and saying any opinion, you are sadly mistaken.

Originally Posted by ICDEDPPL (Post 4488096)

With the amount of backpeddaling seems you and BHB must not be locked in a 69 embrace any longer.. progress

Originally Posted by Full Force (Post 4488098)

Zone 5 defended Bob in. My thread before from what I recall...


When you call Bob have him chime in here, if he still has the ability to

Originally Posted by Budman II (Post 4488064)

Hopefully this thread will stay on target as an analysis thread about camshaft issues, and not digress into another flame thread that will have to be locked or deleted. Although extremely long, there is some useful information buried in here.

Originally Posted by Zone 5 (Post 4488100)

You started this agenda thread and you claim this? If you know where it is, post the link.

Originally Posted by ICDEDPPL (Post 4487630)

Btw, where`s that Zone 5 guy? Over at Boatfreaks still in love with BHB?. Boatfreaks looooove them some magic Bobby cams.

Originally Posted by Full Force (Post 4488113)

I don't want this thread locked let's keep to the facts here, this is clearly an issue as seen here with proof, no agenda at all, besides warning others