Offshoreonly.com - Oil bypass question

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Oil bypass question (https://www.offshoreonly.com/forums/general-q/341861-oil-bypass-question.html)

bck	10-10-2016 03:01 PM

Quote:

Originally Posted by 14 apache (Post 4490149)

http://www.wixfilters.com/Speciality/Racing.aspx

Do you have an opinion on the filter media? The 5700 3r and 51222r are interchangeable but the filtering is different. Looks like 1 filters finer particles but actually flows more? The other is tougher and more resistant to heat and water for endurance. I've been using the "endurance" 51222r, didn't even know there was another with the same dimensions.

14 apache

10-10-2016 03:02 PM

Quote:

Originally Posted by JMPH (Post 4490174)

But remember there is two bypasses,one beside the centre and one below the centre, I took the two out and plugged the one to the right of the centre.

One is for the cooler and other is for the filter. Sounds like you did the filter one.

Bajaorlando

01-19-2019 08:23 AM

Does anyone have a part number for the plug

Ryan00TJ

01-19-2019 09:21 AM

Quote:

Originally Posted by Bajaorlando (Post 4668726)

Does anyone have a part number for the plug

https://www.offshoreonly.com/forums/...ot-bypass.html

Bajaorlando

01-19-2019 01:08 PM

Thanks Ryan

AusScarab29

01-19-2019 06:16 PM

Quote:

Originally Posted by Bajaorlando (Post 4668726)

Does anyone have a part number for the plug

These are the valves I got from Summit,for a plug you can use freeze/welsh plug
https://www.summitracing.com/int/par...1284/overview/

All times are GMT -5. The time now is 12:31 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page