Oil bypass question
#1
Registered
Thread Starter
Oil bypass question
Picked my motor up from the builder saturday. Sounds amazing! I have a question about the oil psi bypass valve.
When i dropped the motor off the oil bypass was plugged. He used a different filter plate to run it on the stand and it had a spring valve in it ( no clue what #). Before dropping the motor back in the boat i swapped them out and put my plugged filter plate back on. Ok?
I tried calling my guy but javnt heard back yet.
When i dropped the motor off the oil bypass was plugged. He used a different filter plate to run it on the stand and it had a spring valve in it ( no clue what #). Before dropping the motor back in the boat i swapped them out and put my plugged filter plate back on. Ok?
I tried calling my guy but javnt heard back yet.
#2
Gold Member
Gold Member
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,633
Likes: 0
Received 203 Likes
on
131 Posts
Better off blocked off bypass then the wrong bypass, I run the 30# ones but many guys use the 11 and have issues... Blocked is fine also then it gaurantees all oil goes through cooler
#3
Picked my motor up from the builder saturday. Sounds amazing! I have a question about the oil psi bypass valve.
When i dropped the motor off the oil bypass was plugged. He used a different filter plate to run it on the stand and it had a spring valve in it ( no clue what #). Before dropping the motor back in the boat i swapped them out and put my plugged filter plate back on. Ok?
I tried calling my guy but javnt heard back yet.
When i dropped the motor off the oil bypass was plugged. He used a different filter plate to run it on the stand and it had a spring valve in it ( no clue what #). Before dropping the motor back in the boat i swapped them out and put my plugged filter plate back on. Ok?
I tried calling my guy but javnt heard back yet.