Professional Motor rebuild question...
12-28-2016, 09:52 AM
#33
Platinum Member
Originally Posted by Unlimited jd
Iirc there is a plug above the fuel pump boss that if left out won't necessarily leak at idle but shoots oil out pretty bad at higher rpms. Had a drag car motor brought to me for that once a while back.
12-28-2016, 08:00 PM
#35
Registered
Thread Starter
Join Date: Jul 2011
Location: Spring, TX
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rookie
You have Procharged engines, right?
They were not dyno'd on stand just built then back to mechanic and in boat. stock valve covers are still on boat...Two procharged motors but only newly rebuilt one leaks, both superchargers went back to Procharger last year and both were still in perfect shape. They just resealed them and sent back.
12-28-2016, 08:02 PM
#36
Registered
Thread Starter
Join Date: Jul 2011
Location: Spring, TX
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cabin fever
In your other post you mention someone told you the mechanic is a pill head...........pretty sure i found your problem.
12-28-2016, 08:04 PM
#37
Registered
Thread Starter
Join Date: Jul 2011
Location: Spring, TX
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by buck35
so is the oil misted all over or puddled up in the bilge?
12-28-2016, 08:09 PM
#38
Registered
Thread Starter
Join Date: Jul 2011
Location: Spring, TX
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by activator40
Smith speed Jordan..He's the best..Very thorough..Located Conroe or kemah area
12-28-2016, 08:46 PM
#39
Registered
larry, I must have missed it but what CID are these engines?
12-28-2016, 09:00 PM
#40
Registered
Thread Starter
Join Date: Jul 2011
Location: Spring, TX
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
