another cam thread

Reply Subscribe

Thread Tools

01-28-2017 | 09:48 AM

#11

MILD THUNDER

Registered

Joined: Jul 2004

Posts: 11,332

Likes: 73

From: chicago

Comp Cams custom billet HUC hyd roller with iron gear 410 bucks and at your door in a week.

239/247 109 LSA 106ICL .621/632

01-28-2017 | 10:32 AM

#12

Sonic30ss

Gold Member

Joined: Oct 2002

Posts: 1,237

Likes: 165

From: SWFL

Quote:

Originally Posted by vintage chromoly

We just put a 238 / 242 @.050 on a 109 LSA with just under .600 lift in my 440.
Good flowing cast iron ported heads.

Flat tappet tight lash mechanical with EDM lifters.

If he wants it to sound killer at the ice cream shop, tighten up the LSA.

Sounds like the old Direct Connection Purple Shaft .590 cam nice and lumpy

01-28-2017 | 11:04 AM

#13

vintage chromoly

Gold Member

Joined: Sep 2011

Posts: 2,643

Likes: 18

From: cleveland ohio

Quote:

Originally Posted by Sonic30ss

Sounds like the old Direct Connection Purple Shaft .590 cam nice and lumpy

Custom crower.

01-28-2017 | 01:00 PM

#14

GETTINBYE

Registered

Joined: Feb 2001

Posts: 484

Likes: 26

From: Elizabethtown KY USA

Kinda torn between 222-230 .576-.598 110 LSA an 226-234 .587-.610 112 LSA. Not overkill by any means but should be very streetable and fun.

Mark

01-28-2017 | 03:36 PM

#15

snapmorgan

Registered

Joined: Aug 2010

Posts: 2,227

Likes: 547

From: Cape Coral FL

This

Lunati 20110712 - Lunati Voodoo Camshafts

Camshaft, Hydraulic Roller Tappet, Advertised Duration 282/290, Lift .600/.600

01-28-2017 | 03:36 PM

#16

sutphen 30

Registered

Joined: Jan 2006

Posts: 3,599

Likes: 1,168

From: taxachusetts

I'd run this cam.

https://www.summitracing.com/parts/edl-2262/overview/

01-28-2017 | 03:38 PM

#17

sutphen 30

Registered

Joined: Jan 2006

Posts: 3,599

Likes: 1,168

From: taxachusetts

Quote:

Originally Posted by snapmorgan

This

Lunati 20110712 - Lunati Voodoo Camshafts

Camshaft, Hydraulic Roller Tappet, Advertised Duration 282/290, Lift .600/.600

ran something very similar in my boats 454's,,engines rip.

01-28-2017 | 04:52 PM

#18

mike tkach

Thread Starter

Registered

Joined: Oct 2007

Posts: 8,439

Likes: 93

From: yorkville,il

Quote:

Originally Posted by snapmorgan

This

Lunati 20110712 - Lunati Voodoo Camshafts

Camshaft, Hydraulic Roller Tappet, Advertised Duration 282/290, Lift .600/.600

this is very close to what i was thinking,you just might win the prizee.

01-28-2017 | 04:54 PM

#19

mike tkach

Thread Starter

Registered

Joined: Oct 2007

Posts: 8,439

Likes: 93

From: yorkville,il

Quote:

Originally Posted by snapmorgan

This

Lunati 20110712 - Lunati Voodoo Camshafts

Camshaft, Hydraulic Roller Tappet, Advertised Duration 282/290, Lift .600/.600

this is very close to what i was thinking,you just might win the prize.

01-28-2017 | 04:58 PM

#20

mike tkach

Thread Starter

Registered

Joined: Oct 2007

Posts: 8,439

Likes: 93

From: yorkville,il

Quote:

Originally Posted by MILD THUNDER

Comp Cams custom billet HUC hyd roller with iron gear 410 bucks and at your door in a week.

239/247 109 LSA 106ICL .621/632

did you run this in your program?only looking to spin this engine to 6000 rpm.

Thread Tools

Show Printable Version

Email this Page

Reply Share

First
Prev
2 / 6
Next
Last