Engine power question N/A motor
02-21-2017 | 10:00 PM
#12
Thread Starter
VIP Member
Joined: Apr 2001
Posts: 4,213
Likes: 0
From: Chicago il
Modified 502 intake and 540CI. Heads are from a 525.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
02-21-2017 | 10:00 PM
#13
Registered
Joined: Feb 2009
Posts: 8,356
Likes: 1,515
From: NW Michigan
02-21-2017 | 10:01 PM
#14
Registered
Joined: Nov 2004
Posts: 14,104
Likes: 3,692
From: On A Dirt Floor
Bang ! I sniffed out that hunk of schit intake ! LOL.
Last edited by SB; 02-21-2017 at 10:04 PM.
02-21-2017 | 10:08 PM
#16
Thread Starter
VIP Member
Joined: Apr 2001
Posts: 4,213
Likes: 0
From: Chicago il
Next step up from a 525 cam. I was very surprised by the torque being higher than hp at max hp. My intake is not holding things back. My throttle bodies are 30% bigger than stock. It is the heads.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
02-21-2017 | 10:12 PM
#17
Registered
Joined: Feb 2009
Posts: 8,356
Likes: 1,515
From: NW Michigan
525 is 741 cam? Your peak torque at 5100 is what gets me. Throw a Vic jr and holley 850 and be done with it. Lol
02-21-2017 | 10:12 PM
#18
Registered
Joined: Nov 2004
Posts: 14,104
Likes: 3,692
From: On A Dirt Floor
No, under 5250rpm tq will be higher than hp even if you had better heads and intake.It's just math.
The issue you have, is that peak hp is at 5100rpm if you where looking for more hp and at a higher rpm.
What where your goals ?
The issue you have, is that peak hp is at 5100rpm if you where looking for more hp and at a higher rpm.
What where your goals ?
02-21-2017 | 10:14 PM
#19
Registered
Joined: Nov 2004
Posts: 14,104
Likes: 3,692
From: On A Dirt Floor
02-21-2017 | 10:16 PM
#20
Registered
Joined: Feb 2009
Posts: 8,356
Likes: 1,515
From: NW Michigan
