Go Back  Offshoreonly.com > Technical > General Q & A
2003 28'profile >

2003 28'profile

Notices

2003 28'profile

Thread Tools
 
Old 05-15-2017 | 10:13 PM
  #1  
Thread Starter
Registered
 
Joined: Feb 2017
Posts: 69
Likes: 0
Default 2003 28'profile

Does anyone know any history on this boat, I seen bad86ss had it at one time
JoHnSoN is offline  
Reply
Old 05-16-2017 | 05:26 AM
  #2  
Registered
10 Year Member
 
Joined: Dec 2013
Posts: 1,016
Likes: 456
From: Bourbonnais, IL
Default

Is this the boat you're looking at?

http://www.powerboatlistings.com/view/47945

Looks like a nice package. The drive seems a bit rare but looks hefty.
SecondWind is offline  
Reply
Old 05-16-2017 | 05:34 AM
  #3  
Registered
10 Year Member
 
Joined: Feb 2012
Posts: 4,031
Likes: 10
From: westville, NJ
Default

You need to find a stern power guy and check parts availability before committing to that boat. Nice drive but extinct.
dereknkathy is offline  
Reply
Old 05-16-2017 | 05:53 AM
  #4  
Registered
15 Year Member
 
Joined: Jul 2007
Posts: 2,640
Likes: 14
From: MI
Default

The drive would concern me.
JRider is offline  
Reply
Old 05-16-2017 | 06:12 AM
  #5  
Registered
10 Year Member
 
Joined: Feb 2012
Posts: 4,031
Likes: 10
From: westville, NJ
Default

Just checked sternpowr.com. they have parts for 1000 series and 100 series. I would call them and discuss this 2000 series drive before considering this boat. 50k. Is that cheap for this boat, or normal price? If it is worth 100 with a #6 on it it would be another story.
dereknkathy is offline  
Reply
Old 05-16-2017 | 06:31 AM
  #6  
Thread Starter
Registered
 
Joined: Feb 2017
Posts: 69
Likes: 0
Default

Just trying to find out more specs on the motor who built it internals looks like bad86ss owned it and had Motor out at one time
JoHnSoN is offline  
Reply
Old 05-16-2017 | 06:42 AM
  #7  
Thread Starter
Registered
 
Joined: Feb 2017
Posts: 69
Likes: 0
Default

Would a boat like that be custom built from profile like that . Or someone sunk a lot of money in it redoing everything
JoHnSoN is offline  
Reply
Old 05-16-2017 | 06:53 AM
  #8  
Registered
15 Year Member
 
Joined: Jul 2007
Posts: 2,640
Likes: 14
From: MI
Default

I am fairly certain that profile did build that with that drive, I remember reading an article on it. Was supposedly a 130mph boat. Last I knew the old owner of profile had some stern power stuff laying around, I still have his number.
JRider is offline  
Reply
Old 05-16-2017 | 08:32 AM
  #9  
Registered
15 Year Member
 
Joined: Feb 2009
Posts: 8,356
Likes: 1,515
From: NW Michigan
Default

I can't contribute on the drive but the boat looks like a ton of fun.
getrdunn is offline  
Reply
Old 05-16-2017 | 08:45 AM
  #10  
Registered
15 Year Member
 
Joined: Feb 2009
Posts: 8,356
Likes: 1,515
From: NW Michigan
Default

50k seems like a good deal but if you scattered the drive and parts were not available I would at the very least figure on the expense of a drive and assm. Could easily be half the expense of the boat to rig and replace. With that kind of power and still holding up says something for it.
getrdunn is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.