Difference between pulling boat with transmission.and Stern Powr
#1
Thread Starter
Registered
Joined: Jun 2017
Posts: 76
Likes: 1
Ok I've decided to pull my engine and transmission.
I've pulled Alphas and Bravos but never one with the transmission attached.
I know with the others you pull the drive first.
To add another thing this boat has a Stern Powr drive.
So what's the proper way to go about this??
I've pulled Alphas and Bravos but never one with the transmission attached.
I know with the others you pull the drive first.
To add another thing this boat has a Stern Powr drive.
So what's the proper way to go about this??
#2
Registered

Joined: Feb 2012
Posts: 4,031
Likes: 10
From: westville, NJ
You can usually pull engine forward enough to free spline from the driveshaft, but putting it back the same way is a pain. Stern power is no worse to pull than any other drive. You weren't changing the cam with engine in place anyway.
#3
Thread Starter
Registered
Joined: Jun 2017
Posts: 76
Likes: 1
Do you know if stern Powr uses the same alignment tool as merc or volvo?



