Best EFI System for Big Block Chevy- 1200hp+
#1
Thread Starter
Registered
Joined: May 2017
Posts: 244
Likes: 0
From your experience what are good options for putting EFI on a bbc
Talking about a 1100-1200 hp big block
MSD makes one good to up to 600 hp
Holley makes one but I think it is to only 800 hp
Anyone?
Talking about a 1100-1200 hp big block
MSD makes one good to up to 600 hp
Holley makes one but I think it is to only 800 hp
Anyone?
#6
https://www.holley.com/products/fuel...8aAiIYEALw_wcB
Last edited by Nice Pair; 11-26-2017 at 07:00 PM.
#8
Registered

Joined: Feb 2004
Posts: 202
Likes: 10
From: LOTO
Go EFI 2x4 Power Adder System for up to 1200 HP #30064
So this looks interesting , anyone know anything about these ? I started looking at the sniper but wonder if they would be able to tune themselves in a dual app. using a 02 sensor in each bank.
So this looks interesting , anyone know anything about these ? I started looking at the sniper but wonder if they would be able to tune themselves in a dual app. using a 02 sensor in each bank.
#9
Registered

Joined: Jan 2006
Posts: 3,854
Likes: 786
From: St. Pete Beach, FL
Go EFI 2x4 Power Adder System for up to 1200 HP #30064
So this looks interesting , anyone know anything about these ? I started looking at the sniper but wonder if they would be able to tune themselves in a dual app. using a 02 sensor in each bank.
So this looks interesting , anyone know anything about these ? I started looking at the sniper but wonder if they would be able to tune themselves in a dual app. using a 02 sensor in each bank.
#10
Registered
Joined: Dec 2013
Posts: 358
Likes: 2
From: Minneapolis, Mn
If it was me I would be running Holley Dom with injectors in the manifold right before the valves. You could then run COP and only use your Dis. as a signal generator. Very simple set-up.
I'm using Holley HP on my Twin Turbo LS in my boat. Wish I would of up the coin just so I could have DBW(drive by wire) otherwise I have been 100% happy with my holley set-up. Very easy to learn, very constant day in and day out.
I'm using Holley HP on my Twin Turbo LS in my boat. Wish I would of up the coin just so I could have DBW(drive by wire) otherwise I have been 100% happy with my holley set-up. Very easy to learn, very constant day in and day out.



