502 build advise
05-15-2018 | 10:53 AM
#22
Platinum Member
Joined: May 2012
Posts: 11,434
Likes: 3,961
From: Midwest & T-Rock
Another option is to call Bill at Ateco Marine. He has various upgrade packages for the 502 MPI. Mine are now 540's with Dart Pro 1 heads and made 630hp at 5300rpm's using the merc mpi intake and fuel injection system (MEFI 3). They look like stock 502 mpi's, but boat runs about 10mph faster and they idle like stock motors as well. Third year and 80+ hours on the motors and very happy.
05-18-2018 | 08:48 AM
#23
Registered
Joined: Mar 2004
Posts: 65
Likes: 0
From: Denver, NC
Cam is .632 and .632 lift on 114 center, pistons are SRP dome top +10cc. Have dyno sheets but need to find them, actually went to the shop and witnessed a few dyno runs. Yes 540ci with rods 6.385, bore is 4.500 and stroke is 4.250.
05-22-2018 | 06:46 AM
#25
Thread Starter
Registered
Joined: May 2018
Posts: 206
Likes: 4
After reading countless articles and contributions from various forums, my goal is to be slightly over 500hp. I know I do not have the pocket depth to build a 90+ mph boat so I decided to stay mostly stock. I plan on keeping the heads and rotating assembly stock. I want to add a cam and cmi's The opinions on cams is all over the place. So the last 2 pieces of the puzzle are cam and someone who can program my ECU to match the upgraded exhaust and cam. Any Ideas? I appreciate everyone's input it is appreciated .
05-22-2018 | 01:49 PM
#26
Platinum Member
Joined: Oct 2003
Posts: 788
Likes: 0
From: Townsville Australia
Crane 168741.Or if you want to tone it down a bit a crane 731.I have 2 of them out of 500 EFI's if your interested $250 our money about $200 in yours plus shipping.
Quite a few in your part of the world to do your ECU.Google.
Quite a few in your part of the world to do your ECU.Google.
