|
Guess the new power game!
After searching high and low for a local dyno I can’t find one to test my build so everyone is welcome to take a stab at it. 525EFI cam LIFT: .610"/.627" DURATION: 289°/297° Edelbrock Performer RPM Oval heads with the chambers cleaned up. Performer Rpm Airgap intake gasket matched QF850m carb Comp Cams magnum rockers ~10:1cr |
|
|
0-565hp
|
0 is certainly possible. :p |
557 hp.this was determined by the SWAG method.
|
1 miiiiiiiillllllllliiiiiiiiiooooooooooonnnnnnnnnn Hp,,correction factor may be a tad high.:D
|
575-595 |
Originally Posted by sutphen 30
(Post 4647834)
1 miiiiiiiillllllllliiiiiiiiiooooooooooonnnnnnnnnn Hp,,correction factor may be a tad high.:D
|
Originally Posted by sutphen 30
(Post 4647834)
1 miiiiiiiillllllllliiiiiiiiiooooooooooonnnnnnnnnn Hp,,correction factor may be a tad high.:D
This guy doing pretty much the same build but with a smaller cam and lower compression got 588, but I’ll guess 575 which would be plenty. I’m still looking for a real dyno to find out. Cam in the similar build. 242/248 duration, 0.566/0.566 lift, 112 LSA COMP stick. https://cimg8.ibsrv.net/gimg/www.off...e83700f61.jpeg |
| All times are GMT -5. The time now is 06:37 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.